PRODUCT SUMMARY TOOLING SYSTEMS OVERCOME TOOL OVERHANG CHALLENGES STEADYLINE® TURNING I BORING I MILLING Effectively machine difficult-to-access areas using long overhang tools, such as deep cavities or sections of large, complex monolithic workpieces where vibration often becomes an issue, using our patented Steadyline® passive dynamic damping system. Steadyline® products include cost-effective milling holders as well as turning and boring bars, perform typical long overhang operations twice as fast as traditional tools. These highly productive vibration-damping solutions offer high metal removal rates, smooth part surface finishes and long tool life -all while reducing machine tool stress. KEY BENEFITS • Plug-and-play system • Coolant through • Vibration damping system • Flexible & efficient tool changes • BA & GL connections • Cylindrical, Seco-Capto and HSK-T/A STEADYLINE® BARS • Available in over 75 standard models • 1”, 1.25”, 1.50”, 2.00”, 2.50”, 3.00” and 4.00” (p32, 040 050, 06O, 08O and 0100 mm) • 6xD, 8xD and lOxD • Shank connection: Seco-Capto™, HSK-T/A and cylindrical

JETSTREAM TOOLING® GL TURNING HEADS • • • • • • • • More than 170 GL turning heads Available in three connection sizes: GL32, GL40, GL50 Cutting directions: left and right Negative inserts for roughing: CN, DN, WN Positive inserts for inishing: CC, DC, TC, VB CBN inserts: RN, TN Heads for threading inserts Heads for MDT: 0.079” - 0.157”(2 - 4 mm) grooving with Jetstream Tooling® • 40 Jet GL turning heads SECO PRODUCT SUMMARY TOOLING SYSTEMS BA-CONNECTIONS • Available in three sizes: 2.50”, 3.00” and 4.00” (ø60, ø80 and ø100 mm) • Each has two ofset sizes for lower bore sizes and additional chip...