Indexable Milling Catalog.pdf
834Pages

{{requestButtons}}

Catalog excerpts

Indexable Milling Catalog.pdf - 1

CATALOG & TECHNICAL GUIDE 2020.2

Open the catalog to page 1
Indexable Milling Catalog.pdf - 2

Headquartered in Fagersta, Sweden and present in more than 75 countries, Seco Tools is a leading global provider of metal cutting solutions for milling, stationary tools, holemaking and tooling systems. For more than 80 years, the company has provided the technologies, processes and support that manufacturers depend on for maximum productivity and profitability. For more information on how Seco’s innovative products and expert services bring success to manufacturers across all industry segments, please visit www.secotools.com

Open the catalog to page 2
Indexable Milling Catalog.pdf - 4

Square shoulder and slot milling cutters General information inserts Disc milling cutters Face milling cutters Helical milling cutters Spot facing cutters Chamfer milling cutters Plunge milling cutters Copy milling cutters High feed milling cutters For more information: www.secotools.com

Open the catalog to page 4
Indexable Milling Catalog.pdf - 5

Square shoulder and slot milling cutters Spot facing cutters Helical milling cutters Chamfer milling cutters Spot facing cutters Chamfer milling cutters Plunge milling cutters Copy milling cutters Disc milling cutters Hig feed milling cutters Face milling cutters For more information: www.secotools.com

Open the catalog to page 5
Indexable Milling Catalog.pdf - 6

Alphanumeric index tools Alphanumeric index tools

Open the catalog to page 6
Indexable Milling Catalog.pdf - 7

Alphanumeric index tools Alphanumeric index tools

Open the catalog to page 7
Indexable Milling Catalog.pdf - 8

Alphanumeric index inserts Alphanumeric index inserts

Open the catalog to page 8
Indexable Milling Catalog.pdf - 9

Technical information Cutters Mounting type Type – Arbor (Shell end) Type – Arbor hole Type 3 – Weldon Tool chucks acc. to ISO 5414 DIN 1835 Type 3S – Seco/Weldon® Tool chucks acc. to ISO 5414 DIN 1835

Open the catalog to page 9
Indexable Milling Catalog.pdf - 10

Technical information Cutters Insert clamping system Clamping by S - screw The inserts are clamped by an inclined screw which holds the insert in position in its seat. Centre lock clamping The inserts are secured through a centre hole by means of a screw which clamps the insert firmly against the bottom and side of its seat. The inserts are held in position by a wedge and a screw which clamps the insert onto the seat. (Example shows milling cutter with cassettes). Clamping by spring action The inserts are retained by a clamping/spring action into a fixed insert seat The inserts are secured...

Open the catalog to page 10
Indexable Milling Catalog.pdf - 11

Technical information Inserts Code keys inserts S 2. Insert side clearance angle A

Open the catalog to page 11
Indexable Milling Catalog.pdf - 12

Technical information Inserts Code keys inserts 3. Tolerances Tolerance class Tolerances: mm/In

Open the catalog to page 12
Indexable Milling Catalog.pdf - 13

Technical information Inserts Code keys inserts 6. Thickness 01 = 1,59 mm T1 = 1,98 mm 02 = 2,38 mm 03 = 3,18 mm 01 = 0.0626 Inch T1 = 0.0780 Inch 02 = 0.0937 Inch 03 = 0.1252 Inch T3 = 0.1563 Inch 04 = 0.1874 Inch 05 = 0.2189 Inch 06 = 0.2500 Inch 07 = 0.3126 Inch 08 = 0.3150 Inch 09 = 0.3748 Inch 7. Corner configuration 1st letter nose radius M0 = round inserts (metric version) 005 = 0,05 mm 01 = 0,1 mm 02 = 0,2 mm 04 = 0,4 mm 08 = 0,8 mm 12 = 1,2 mm etc. M0 = round inserts (inch version) 005 = 0.0020 Inch 01 = 0.0039 Inch 02 = 0.0079 Inch 04 = 0.0157 Inch 08 = 0.0315 Inch 12 = 0.0472...

Open the catalog to page 13
Indexable Milling Catalog.pdf - 14

Technical information Inserts Insert grades Uncoated Grades Wear resistant grade for milling in cast iron and non-ferrous alloys. Hard, wear resistant grade for milling in aluminium. Tough micro-grain carbide grade for milling in superalloys and aluminium. CVD-coated grade based on Duratomic™ coating, First choice in steel for maximizing manufacturing output under most varying productivity. Alternative choice stainless steel applications under stable condition. Ti(C, N)-Al2O3 CVD-coated grade based on Duratomic™ coating. Basic grade for milling cast iron and nodular cast iron, with or...

Open the catalog to page 14
Indexable Milling Catalog.pdf - 15

Technical information Inserts Hard and wear resistant grade for milling in aluminium and non-ferrous alloys. Excellent grade, in combination with protected cutting edges, for high speed machining in hardened steel. (Ti, Al) N – TiN Tough grade for rough milling in tool steel. (Ti, Al) N – TiN Basic grade for Minimaster inserts and thread milling inserts. Also suitable for milling stainless steel, hardened steel and superalloys. (Ti, Al) N – TiN PVD-coated grade for tough machining conditions and high temperatures in martensitic and austenitic stainless steels, dry and wet machining...

Open the catalog to page 15
Indexable Milling Catalog.pdf - 16

Technical information Inserts Insert grades Cemented carbide is an alloy of tungsten carbide (WC) and cobalt (Co). Cubic carbides like tantalum carbide (TaC), titanium carbide (TiC) and niobium carbide (NbC) can also be added. Tungsten carbide is the main component and gives the hardness. Cobalt is the binder phase and gives the toughness. Cubic carbides are added in order to affect properties like hot hardness, deformation resistance and chemical wear resistance. Most modern grades are coated with either CVD (Chemical Vapour Deposition) or PVD (Physical Vapour Deposition) technique. The...

Open the catalog to page 16
Indexable Milling Catalog.pdf - 17

Technical information Inserts Insert geometries - Designation system Difficult machining conditions, strong insert cutting edge. Easy machining conditions, sharp insert cutting edge. Increasing chip thickness/feed rate. Negative and very protected cutting edge Negative and protected cutting edge Positive and protected cutting edge Very positive and protected cutting edge Positive and sharp cutting edge Very positive and very sharp cutting edge

Open the catalog to page 17
Indexable Milling Catalog.pdf - 18

APMXE APMXS AZ BD BHTA BS C CBTHN CCER CDX CF CHW Cmax Cmin CPNDIA CTMS CW DC DCB DCB1 DCSFMS DCSFWS DCX DMM FDESU FDP FDSSU GAMF GAMO GAMP HC IC INSD INSL KAPRE KAPRS KCH KWW L LB LE LF LS LUX OAL PDX PNA RE RP RMPX RPMX S S1 UTCN TDZ THUB TTL W1 ZEFP ZNP SA TACH DC1 LPR FHA PL SIG BEC DN RA Depth of cut maximum in feed direction end Depth of cut maximum in feed direction side Plunge depth maximum Body diameter Body half taper angle Wiper edge length Keyway depth Connection body thickness Curved cutting edge radius Cutting depth maximum Spot chamfer Corner chamfer width Helical...

Open the catalog to page 18
Indexable Milling Catalog.pdf - 19

Square shoulder and slot milling cutters Technical information Square shoulder and slot milling cutters Milling cutters Effective No. of teeth (ZEFP) Cutter diameter 217 = With shank 220 = For arbor Shank diameter Insert size Shank type 0 = Cylindrical 3 = Weldon 3S = Seco Weldon RE = Combimaster Cutter system Insert size Face milling cutters Effective No. of teeth (ZEFP) R 217 69 01.25 3S 12 Right hand rotation Cx = For Seco-Capto A = With through coolant supply AD = Anti vibration material with through coolant supply T = Close pitch version for contouring operations C = With adjustable...

Open the catalog to page 19

All SECO TOOLS catalogs and technical brochures

  1. SQUARE T4

    2 Pages

  2. SECO NEWS

    310 Pages

  3. DURATOMICTM

    16 Pages

  4. DISC MILLING

    36 Pages