- Products
- Catalogs
- News & Trends
- Exhibitions
BA W06
BA W06
- The BA W06 series includes models BA W06-12, BA W06-22, and BA W06-42, featuring a patented monobloc design with 1, 2, or 4 spindles.
- Equipped with linear motors in X, Y, and Z axes, offering accelerations up to 3 g.
- Features include a central cooling unit, integrated hydraulic system, and modular tool magazine expandable from 42 to 216 pockets.
- Motor spindles can reach up to 17,500 rpm, with a maximum feed thrust of 10,000 N.
- Designed for medium to high volume production with capabilities for wet or dry machining.
- Offers complete machining in two setups, with clamping fixtures mounted directly or on planetary tables.
- Emphasizes cost-per-part efficiency and long-term quality performance, supported by process optimization and tool trials.
- Working range includes X-axis, Y-axis, and Z-axis with specific dimensions for each model.
- Features torque motors, rotary axes with locking mechanisms, and coolant supply through spindles up to 150 bar.
- Tool change systems and capacities vary by model, with chip-to-chip times as low as 0.7 seconds.
- SW offers maintenance contracts, training at the SW-Academy, and online services including condition monitoring.
- Machines are designed for optimum accessibility and quick fixture changes, enhancing operational efficiency.
Catalog excerpts
m construction machining centres available on the market. The patented monobloc (QUBE) designed as a stiff ,cube' carries the 3-axis unit equipped with one, two or four spindles. The twin-spindle BA W06-22 is available with independent Z-axes. Faster and more dynamic due to linear motors in X, Y and Z-axis. Accelerations up to 3 g. < " All a modern machining centre needs: abso lute measuring systems in all axes. A double swivel carrier with two fixture carriers, hydraulically locked on both ends, driven via a torque motor. In-cycle loading. Horizontally arranged clamping fixtures in an optimum ergonomic...
Open the catalog to page 2
Complete machining in two setups. For medium and high volume production of complex, high-quality components. Wet or dry machining (oil mist lubrication). Clamping fixtures direct mounted or on 2- or 4-satellite planetary tables. All satellites with torque drive and separate, direct measuring system. Can be retrofitted at any time. Maximum accuracy and dynamics. Typically for 4 to 64 workpieces. Various tool magazine capacities, modular extension possible. Productivity. Machining processes defined by our experienced project engineers provide for optimum quality and cycle times, giving lowest cost-per-part and...
Open the catalog to page 3
BA W06-12 BA W06-22 BA W06-42 ■ Working range X-axis Y-axis (toolchange position) Z-, Z2-axis Spindle distance ■ Workpiece carrier Swivel carrier / counter bearing with crown gear: swivel time 0/180° A- and U-axis, prepared for mounting a fixture plate, up to max. Drive system Load capacity Speed range A-, U-axis C- and W-axis* ■ Work spindle HSK - A63 Speed range Run up time nmax Spindle bearings 0 Power / Torque (40% duty cycle) ■ Work spindle HSK - A80* Speed range Run up time nmax Spindle bearings 0 Power / Torque (40% duty cycle) ■ Feed drive Drive system Rapid traverse X / Y / Z Axis...
Open the catalog to page 5
There are quite many who build machining centres. But only a few take such intensive and successful care of the entire technological demand of your project like we do. The highest priority is given to deliver the best economical and sustainable solution for your manufacturing task. Which machine model ends up being the right one and how it will be applied most effectively, depends on your requirements for materials to be machined, quality and production volumes. Schwäbische Werkzeugmaschinen GmbH Seedorfer Straße 91 78713 Waldmössingen Germany We proclaim to be ’Technology People’. This is more...
Open the catalog to page 6
