- Products
- Catalogs
- News & Trends
- Exhibitions
BA W04
BA W04
- The BA W04 series includes models BA W04-22 and BA W04-42, featuring a patented monobloc design with 2 or 4 spindles and a 3-axis unit.
- Equipped with linear motors in X, Y, and Z axes for enhanced speed and dynamics.
- Motor spindles can reach up to 17,500 rpm, with a central cooling unit and an integrated hydraulic system.
- Tool magazine capacity ranges from 72 to 232 pockets, with broken tool detection in less than 0.15 seconds.
- Designed for medium to high volume production, capable of wet or dry machining.
- Features include rotary axes with torque motors, coolant supply through spindles, and programmable flushing for clean clamping fixtures.
- Process optimization and cost-per-part calculations are emphasized, with support for automation and other processes.
- Working range includes X, Y, and Z axes with specific dimensions and capabilities.
- Workpiece carrier features a swivel carrier with torque motor drive system.
- Spindle specifications include a hollow shank DIN 69893 – HSK–A63, with a speed range of 1 - 17,500 rpm.
- Feed drive system utilizes linear motors with rapid traverse speeds and high axis acceleration.
- Tool magazine and tool change systems are designed for efficiency, with specific capacities and dimensions.
- SW emphasizes a comprehensive approach to technology and project support, offering process design, simulation, and optimization services.
- Training and maintenance services are available through the SW-Academy and SW Online Service.
Catalog excerpts
Machining centres BA W04-22 BLOCK | BA W04-22 | BA W04-42
Open the catalog to page 1
( The BA W04 is one of the fastest machi- m construction ning centres available on the market. The patented monobloc (QUBE) designed as a stiff ,cube' carries the 3-axis unit equipped with two or four spindles. The BA W04-22 is optionally available with two independent Z-axes or with a robust, block-type spindle head. The BA W04-42 is equipped with a block-type spindle head. Faster and more dynamic due to linear motors in X, Y and Z-axis. < " All a modern machining centre needs: architecture absolute measuring systems in all axes. A double swivel carrier with two fixture carriers, hydraulically...
Open the catalog to page 2
Complete machining in two setups. For medium and high volume production of complex, high-quality components. Wet or dry machining (oil mist lubrication). Clamping fixtures direct mounted or on 2- or 4-satellite planetary tables. All satellites with torque drive and separate, direct measuring system. Can be retrofitted at any time. Maximum accuracy and dynamics. Typically for 4 to 64 workpieces. Various tool magazine capacities, modular extension possible. Productivity. Machining processes defined by our experienced project engineers provide for optimum quality and cycle times, giving lowest cost-per-part and...
Open the catalog to page 3
BA W04-22 Block BA W04-22 ■ Working range X-axis Y-axis (toolchange position) Z-axis Spindle distance ■ Workpiece carrier Swivel carrier / counter bearing with crown gear: swivel time 0/180° A- and U-axis, prepared for mounting a fixture plate, up to max. Drive system Load capacity Speed range A-, U-axis C- and W-axis* ■ Work spindle Spindle taper Speed range Run up time nmax Spindle bearings 0 Power (40% duty cycle) Torque (40% duty cycle) ■ Feed drive Drive system Rapid traverse X / Y / Z Axis acceleration X / Y / Z Max. feed thrust X / Y / Z ■ Accuracy (according to VDI/DGQ 3441) Position...
Open the catalog to page 5
There are quite many who build machining centres. But only a few take such intensive and successful care of the entire technological demand of your project like we do. The highest priority is given to deliver the best economical and sustainable solution for your manufacturing task. Which machine model ends up being the right one and how it will be applied most effectively, depends on your requirements for materials to be machined, quality and production volumes. Schwäbische Werkzeugmaschinen GmbH Seedorfer Straße 91 78713 Waldmössingen Germany We proclaim to be ’Technology People’. This is more...
Open the catalog to page 6
