BA W02-22
8Pages

SPINDLE DISTANC_ CHIP-TO-CHIP TIMETtS SV INSTALLATION SURFACE 4w ENERGY MANAGEMENT SYSTEM

Pure productivity in four square meters The two-spindle BA W02-22 machining center with linear and torque motors is setting new standards in 5-axis machining. On just 4 square meters of installation surface you can manufacture complex workpieces made of non-magnetic materials at high speeds. That makes this machine ideally suited for a highly diverse range of applications in precision engineering, including the watchmaking industry and impeller manufacturing in the automotive industry. The wear-free direct drives ensure the lowest total cost of ownership due to maximum availability. •...

Chip-to-chip in less than 2 seconds With a spindle distance of 250 mm, the feed axes accelerate at up to 24 m/s² to a rapid traverse of up to 120 m/min. In the first configuration level, the HSK-A40 motor spindles reach the maximum speed of 25,000 rpm within 0.7 seconds. The chip-to-chip time for a tool change is only 1.75 seconds. The double swiveling workpiece carrier allows you to load the BA W02-22 in parallel to production time, thereby further reducing auxiliary times. Every detail is carefully conceived In the Y axis an electronically coupled gantry drive ensures optimum positioning...

DIMENSIONS TECHNICAL DATA BA W02-22 HSK-A40 WORKSPACE PER SPINDLE I 2550 | BA W02-22 Working range X-axis Y-axis (toolchange position) Z-axis (Z1/Z2) Spindle distance Workpiece carrier Swivel carrier / counter bearing with crown gear: swivel time 0/180° A- and B-axis, prepared for mounting a fixture plate, up to max. Drive system Load capacity Speed range A-, B-axis C- and W-axis* Work spindle HSK-A40 Speed range Run up time 0 - nmax Spindle bearings 0 Power / Torque (40% duty cycle) Work spindle HSK-E40* Speed range Feed drive Drive system Rapid traverse X / Y / Z Axis acceleration X /...

There are quite many who build machining centres. But only a few take such intensive and successful care of the entire technological demand of your project like we do. The highest priority is given to deliver the best economical and sustainable solution for your manufacturing task. Which machine model ends up being the right one and how it will be applied most effectively, depends on your requirements for materials to be machined, quality and production volumes. Schwäbische Werkzeugmaschinen GmbH Seedorfer Straße 91 78713 Waldmössingen Germany We proclaim to be ’Technology People’. This is...