- Products
- Catalogs
- News & Trends
- Exhibitions
BA one8
BA one8
The BA one8 is a machining solution designed for workpieces made of aluminum and non-magnetic materials. It is particularly useful for single-spindle pre- or post-machining and integrates seamlessly into multi-spindle manufacturing chains.
Technical Specifications
- Workspace Dimensions: X-axis: 800 mm, Y-axis: 950 mm (tool change position up to 1250 mm), Z-axis: 650 mm.
- Workpiece Carrier A/U: Swivel carrier with crown gear, swivel time approximately 4.75 seconds, load capacity of 2 x 700 kg, speed range 1 - 40 rpm.
- Workpiece Carrier B/V: Similar specifications to A/U with a maximum fixture plate diameter of 875 mm x 1000 mm.
- Work Spindle Options: HSK-A63, HSK-A80, HSK-A100 with varying speed ranges and power/torque specifications.
- Feed Drive: Linear motor system with rapid traverse speeds of 120 m/min and axis acceleration of 10/10/20 m/s².
- Accuracy: Position tolerance X/Y/Z is 0.006 mm, with an accuracy package available for enhanced precision.
- Tool Magazine: Various capacities and tool specifications depending on spindle type, with a chip-to-chip time of approximately 3.0 seconds.
- Weight and Dimensions: Total weight is approximately 18,000 kg, with transport dimensions of 3.02 m x 3.60 m x 5.40 m.
- Connected Load: Operating voltage of 3 x 400 Volt, 50 Hz, with a total connected load of 100 kVA.
- CNC Control System: Siemens SINUMERIK 840 D sl.
Additional Information
Optional features and configurations are available, and specifications are subject to change without prior notice.
Catalog excerpts
For the rare cases where singlespindle pre- or post-machining is indispensable, SW has the solution: the BA one8. Just like the BA one6, the BA one8 is designed for perfect integration into your multi-spindle manufacturing chain. The BA W08-22 combined with the BA one8 - designed for your success. qciBE consirucuon aDrun architecture
Open the catalog to page 1
TECHNICAL DATA BA one8 BA one8 Working range X-axis Y-axis (toolchange position) Z-axis HSK-A63/A80/A100 Workpiece carrier A / U Swivel carrier / counterbearing with crown gear: swivel time 0 / 180° A- and U-axis, prepared for mounting a fixture plate, up to max. Drive system Load capacity Speed range A-, U-axis C- / W-axis, 1-fold* Load capacity C / W ca. 4,75 s 0 950 mm x 1030 mm Torque motor 2 x 700 kg 1 - 40 rpm upgradable to A / U each 250 kg WORKSPACE PER SPINDLE Workpiece carrier B / V* Swivel carrier / counterbearing with crown gear: swivel time 0 / 180° B- and V-axis, prepared for mounting a...
Open the catalog to page 2
