V 2 L - 40 L, VE 2 L - 5LVertical Balancing Machines for the Aircraft Industry • Simple, safe handling and small space requirement • Balancing in one or two planes • No calibration runs required due to permanent calibration • High measurement accuracy through digital processing of measurement values • Protective shrouds according to SAE standards Range of application Measurement and correction of unbalance in one or two correction planes in individual compressor and turbine discs, spacers, etc. forjet engines. The series VE is designed for rotors that need to be balanced in only one plane. These machines are used in manufacturing and overhaul workshops. Simple change over to other rotor types by exchanging tooling adapters and selecting the respective stored rotor file. Manual unbalance correction in or out of the machine. Design Force-measuring vertical balancing machine with permanent calibration and manual operating sequence. Welded machine housing, balancing unit formed as a dynamometer system, with highly sensitive electrodynamic transducers, precision balancing spindle and drive motor. Control cabinet with operating elements and microprocessor measuring unit, protective shroud according to ISO 7475. Schenck RoTec GmbH Landwehrstrasse 55 D-64293 Darmstadt http://www.schenck-rotec.de E-Mail [email protected]

Vertical Balancing Machines for the Aircraft Industry Vertical, force-measuring balancing machines series V are specially designed for balancing compressor and turbine discs, seals, spacers, etc. for jet engines in one or two correction planes.The accuracy and large operating range of Schenck RoTec machines permits many balancing tasks to be covered by one machine, reducing the handling costs and increasing efficiency. For jet engine rotors that are balanced in only one plane the VE series is the cost-effective solution.The vibration system here also operates according to dynamometer principles...

V 2 L - 40 L, VE 2 L - 5LVertical Balancing Machines for the Aircraft Industry Technical data at a glance VEIL VE2L VE3L VE4L VE40L VE5L V1L V2L V3L V4L V40L Measuring unit cab 925 cab 925 cab 925 cab 925 cab 925 cab 925 cab 925 cab 925 cab 925 cab 925 cab 925 Balancing accuracy Test rotor Drive power Drive locking equipment Report printout equipment 2) Alternatively also 1100 min-1 3) Conformance to SAE ARP 4050 / 5323 with corresponding SAE test rotor 4) 1 lb = 0.456 kg 5) Tasks with an open shroud. Non-binding, dependent on the respective equipment delivery Schenck RoTec GmbH Landwehrstrasse...