Scanmaster - GRT+Plus Presentation
16Pages

{{requestButtons}}

Catalog excerpts

Scanmaster - GRT+Plus Presentation - 1

Walk-Through Metal Detectors

Open the catalog to page 1
Scanmaster - GRT+Plus Presentation - 2

Technical Features Sample Tender Technical Specifications Technology: DSP (Digital Signal Processing) Very High Sensitivity thanks to its unique coil geometry and advanced DSP technology, can detect even very small metal objects performing ultimate Sensitivity spectrums Detection Zones: 8 Parallel Overlapping Detection Zones, Separate Zone Sensitivity Adjustment Feature for each distinct zone and 0-999 Sensitivity Steps Zone LEDs at both the Entrance and Exit Side of the WTMD passage providing high visibility of height on alarm display GRT (Gun Reveal Technology) Wireless interface Battery...

Open the catalog to page 2
Scanmaster - GRT+Plus Presentation - 3

Technical Features Sample Tender Technical Specifications Real Time Date-Time feature and display on LCD Green/Red Traffic Through LED indications and 6 Digit In/Remain/Out Counters can count up to 999999 visitors Two Level Menu Access Password Administrator/Operator and Operator Limitations Enabled BITE (Built In Test Equipment) performing self test Green(Normal)/Red(Failure) Operation Status LED indications that can be recognized from 10 m distance. Digital Password + Electronic Hardware Key Protection Metal Density Display LED Bar Graph Battery Back-Up IRDA Pilot Remote Controller Relay...

Open the catalog to page 3
Scanmaster - GRT+Plus Presentation - 4

Scanmaster® WTMDs have a unique feature. Our technologic advances are under Industrial Property Rights protection. Conventional WTMDs perform detection for a single security level and provide audio-visual Alarms. Scanmaster®/GRT enables operators to set a secondary Security Level for Gun Size Threat Objects to trigger Vibrating Gun Alerts to a Vibrating Carry-On Gun Alert Device delivering instant Vibrating Alerts using wireless Communication interface. Whilst primary General Sensitivity Settings in course, the Scanmaster®/GRT may generate Audio-Visual Alarm Indications. The Secondary...

Open the catalog to page 4
Scanmaster - GRT+Plus Presentation - 5

DSP (Digital Signal Processing Technology)  Scanmaster® WTMDs use latest technology DSP (Digital Signal Processing). The use of such advanced technology provides discreet solutions to perform complex mathematical calculation formulas within microseconds without the need to round up the very sensitive magnetic field measurements. The use of DSP technology provides superior advantages compared to Analog Devices in regards the need for Superior Detection Performance and the use of multiple applications in perfect synchronization. In most applications, the equipment's those which perform using...

Open the catalog to page 5
Scanmaster - GRT+Plus Presentation - 6

8 Parallel Overlapping Detection Zones (Multi-Zone)  Scanmaster® WTMDs perform Multi-Zone Operation with 8 Parallel Overlapping Detection Zones. LED Detection Zone Indicators provides visual LED Light indications only for the Detection Areas. Targeted Zone indications provides ease for Security Screening Checkpoint Staff. Zone LEDs are both at the entrance and exit side of the WTMD passage Scanmaster®/GRT enables separate zone sensitivity settings feature for each distinct zone. Zone LEDs are from bottom to top of one side panel of the WTMD without any dead zones

Open the catalog to page 6
Scanmaster - GRT+Plus Presentation - 7

Green/Red Traffic Through Lights Scanmaster® WTMDs have bicolor Green/Red Pacing Lights at the entrance side of the WTMD Passage. Pacing lights are in use to control the traffic thorough and to prevent multiple entries at a time so that single detections can be performed in sequence enabling counter values increase by one after each visitor. When the WTMD Passage is empty and WTMD is ready for a new detection, the pacing lights will be Green. When there will be a person inside the WTMD Passage the pacing lights will indicate Red and will turn to red after completion of the pass through...

Open the catalog to page 7
Scanmaster - GRT+Plus Presentation - 8

■ Scanmaster® WTMDs count both the incoming, outgoing and remain visitors counts traffic and display the counter values on LCD. Scanmaster®/GRT also provides statistical information regarding the number of alarms generated and the clean visitors. Countervalues can be reset easily. ■ There is a 6 Digit Counter Feature in course enabling proper counting of up to 999.999 persons without any need to reset the counters. DENSITY DISPLAY • • • • • SENSITIUITV LEUEL BflTTERV MODE IN OUT

Open the catalog to page 8
Scanmaster - GRT+Plus Presentation - 9

Scanmaster® Walk-Through Metal Detectors are equipped with 1 USB Port Slot on the front side of the Control Panel providing easy Access. USB Port enables connection of a FAT32 Format Flash Memor (USB Stick) to your WTMD and below Screen Display appears on the LCD Screen. In USB Menu the following features are enabled; Downloading All WTMD Settings Uploading WTMD Settings to a different WTMD in a matter of seconds Exporting Statistical Information to a text file with Date-Time and Device ID stamp Such features provides great advantages for expert level users with large number of...

Open the catalog to page 9
Scanmaster - GRT+Plus Presentation - 10

Supported Hardware Levels  Scanmaster® WTMDs are being offered at different equipment levels and supported features. Please make sure the desired configuration of our WTMD is in compliance with the P/I format offers you have been provided in writing. GRT (Gun Reveal Technology) Wireless Interface Battery Operated Vibrating Carry-On Vibrating Gun Alert Device that delivers instant Vibrating Gun Alerts for a secondary sensitivity level to trigger Vibration Alarms for Gun Size Threat Objects. Built-in Battery Back Up System enabling minimum 2 hours Continuous Operation against electricity...

Open the catalog to page 10
Scanmaster - GRT+Plus Presentation - 11

Net Passage Width of WTMD Scanmaster® /GRT is 76 cm. Passage Width of many other WTMDs (Especially the ones of Chinese Origin) being offered in the Marketplace is 70 cm which is not in compliance with International Passage Dimension Requirements. Narrower Passage Width WTMDs have the following disadvantages; - Vibration Caused False Alarms due physical contact to side panels - False Alarms and Sensitivity Setting Difficulties due Metal Objects passing from a close distance to WTMD Side Panel Structures Accordingly, a wider passage width offers both practical and technical advances even...

Open the catalog to page 11
Scanmaster - GRT+Plus Presentation - 12

WTMD Scanmaster®/GRT has 5 Fixed, 20 Adjustable a total of 25 Security Programs for easy sensitivity settings. Thanks to the advanced DSP Technology in course, Scanmaster®/GRT offers 0-999 Steps adjustable sensitivity for each program level and distinct detection zones. SECURITY LEVEL

Open the catalog to page 12

All Scanmaster catalogs and technical brochures