Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. San Giorgio S.E.I.N. s.r.l.
  3. 4,3” MULTIFUNCTION DISPLAY

4,3” MULTIFUNCTION DISPLAY

4,3” MULTIFUNCTION DISPLAY
1 / 1 PageView full catalog

4,3” MULTIFUNCTION DISPLAY

Product catalog summary
Overview: The document describes a compact monitoring and control system designed for measuring main engine parameters. It features a 4.3” resistive touch screen display and supports direct acquisition of sensor measurements without additional converters.
Display Specifications: The system includes a 4.3” TFT LCD display with a resolution of 480 x 272 pixels and high brightness of 700cd. The display is resistive touch-enabled.
Inputs and Outputs: The system offers 8 analog inputs/outputs, 2 digital outputs, and 1 frequency input. It also includes a J1939 CAN Bus port for interfacing with multifunction navigation systems.
Power and Dimensions: The device operates on a power supply of 9/36 V with an average consumption of 500mA. Its dimensions are 118 x 78 x 32mm, with a mounting hole size of 107 x 67mm.
Environmental Specifications: The operating temperature range is -20 to +70 °C, with a protection grade of IP64. The device weighs 200g and complies with IEC60945 standards.
Technical Features: The system, identified as UNS10191, includes monitoring levels and bilges with a bar indicator, customizable pages, digital instrument pages, and night mode monitoring for one engine.
See more

Catalog excerpts

4,3” MULTIFUNCTION DISPLAY-1

4,3” Multifunction display UNS10191 Compact monitoring and control system designed to measure the main engine parameters in one compact and easy to use instrument. It offers a 4,3” resistive touch screen display. A selection of analog inputs and digital outputs allow direct acquisition of measure sensors without any additional signal converters. One J1939 CAN Bus port can be used to interface multifunction navigation systems. Monitoring control Monitoring for one engine in night mode Customisable pages Page with digital instruments Monitoring levels Monitoring levels and bilges with bar indicator T echnical features Display 4,3” TFT LCD, 480 x 272 pixel, high brightness 700cd Touch screen 8 x Analog inputs / Outputs 2 x Digital outputs 1 x Frequency input Communication ports Power supply Mounting hole Operating temperature Protection grade

 Open the catalog to page 1

All San Giorgio S.E.I.N. s.r.l. catalogs and technical brochures

  1. TMA series
    TMA series

    1  Page

  2. VDO match temperature sensors 1 pole
    VDO match temperature sensors 1 pole

    1  Page

  3. Tachometer Ø80 mm - W alternator
    Tachometer Ø80 mm - W alternator

    1  Page

  4. Tachometer with hourcounter Ø80 mm - W alternator
    Tachometer with hourcounter Ø80 mm - W alternator

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.