Metalworking Solutions Technically advanced lubricants for all your metalworking needs

At ROCOL we manufacture a range of innovative greases, oils, metalworking fluids, lubricants, aerosol paints, anti-slip floor coatings and panels – all designed to exceed today’s challenging operating conditions. Over the last 130 years, we have expanded considerably and offer solutions to nearly every facet of industry with over 150 distributors stocking and supplying the product range worldwide. ROCOL has worked with some of the world’s leading companies in many diverse industries and applications, developing products with one common goal: to deliver optimum performance. ® We pride ourselves...

MACHINE SHOP LUBRICANTS Reaming, tapping and drilling lubricants 1-2 Supply and management of ROCOL® cutting fluids 10 Value engineered cutting fluids 11 Fluid care products and equipment 12 Multi-purpose water based cleaner 14 METAL FORMING LUBRICANTS Cold metal forming lubricants 16-17 MOULD RELEASE Mould release agents 19 Mould tool corrosion protectives 20 WELDING & FABRICATION Non destructive testing system (NDT) 21 Metal marking inks 22 Weld spatter release 23 SPECIALIST APPLICATION Glass production lubricants 24

MACHINE SHOP LUBRICANTS Reaming, Tapping and Drilling Lubricants RTD® is the world leading hand applied lubricant for Reaming, Tapping & Drilling operations. The RTD® range contains technically advanced extreme pressure additives which reduce friction at the cutting edge. As a result, it significantly extends the tool life which give cost saving benefits. The additives also give superior surface finish to the work piece reducing waste and scrap. As part of an ongoing development programme, RTD® technology remains at the forefront in cutting performance. RTD® has been successfully serving industry...

RTD® Foamcut Spray Foaming lubricant which doubles tool life ► Suitable for severe cutting operations ► Clean low odour foaming spray ^ Foaming action adheres to the tool t Can be applied directly to moving tools RTD® Cleancut Metal cutting liquid which doubles tool life ► Sulphur & chlorine free ► Water washable t Suitable for aerospace & nuclear applications ► Low viscosity, water soluble lubricant ► Non-fuming, low odour characteristics t Non-staining on yellow metals, aluminium & brass t Available in a plastic squeeze bottle for easy application TRI-Logic RTD® Metal cutting liquid which doubles...

Cutting Fluids CUTTING FLUID The ULTRACUT® range of water mix cutting fluids has been developed to provide optimum cutting performance. The range has remained at the forefront of technology in terms of performance as well as safety and environmental characteristics. The ULTRACUT® range includes products for all metal removal operations. ULTRACUT® EVO has been carefully formulated to be operator friendly and to minimise environmental impact. ® The ULTRACUT range is formulated to provide: High dilution ratios — reduced consumption Exceptional cutting performance — extended tool life Long predicatble...

ULTRACUT EVO Series Water Mix Fluids ULTRACUT EVO is the next generation of cutting fluid from ® ROCOL , with all the performance and cost effectiveness of ® ULTRACUT EVO has been carefully formulated to be operator ®. friendly and minimise environmental impact. Formulated to provide extremely economical dilution ratios with exceptional cutting performance the ULTRACUT® EVO range provides a very cost effective solution to your metal cutting needs. CUTTING FLUID NO BIOCIDES NO HAZARD LABEL NO SKIN SENSITISERS ULTRACUT EVO 250 Long life soluble oil cutting fluid Part code Formulated for light/medium...

ULTRACUT Hard Water Series Water Mix Fluids ® ULTRACUT 250 HW Long life soluble oil cutting fluid for hard water areas All the characteristics of ULTRACUT EVO 250 for use in areas Part code with water hardness more than 270ppm ULTRACUT 255 HW Long life EP soluble oil cutting fluid for hard water areas Part code in areas with water hardness more than 270ppm Operator friendly Careful selection of our raw materials ensures there are no risk phrases assigned to our Hard Water and Semi Synthetic cutting fluids when diluted - therefore minimising the risk of Health & Safety concerns.

ULTRACUT Semi Synthetic Series Water Mix Fluids CUTTING FLUID ULTRACUT Semi Synthetic Series is a range of highly refined mineral oil fluids that form a semi-synthetic micro emulsion. They can be used to rationalise to one fluid for cutting and grinding applications. ® The range is safe and pleasant to use. They give a long predictable sump life, which make them very cost effective. ULTRACUT 370 Plus Long life high dilution semi-synthetic cutting & grinding fluid Very high dilution – Low in sump cost Suitable for use as a light/medium cutting & grinding fluid Forms a translucent green micro-emulsion...

ULTRACUT 620 Water Mix Fluid The ULTRACUT* 620 is a chlorine free semi-synthetic micro emulsion that has Extreme Pressure (EP) performance -reduces tool wear and improves surface finish. ULTRACUT® 620 Long life chlorine free EP semi-synthetic cutting & grinding fluid ► Ideal for medium to severe cutting & grinding operations ► Unique EP additives - formulated to give superior performance and extend tool life t Very economic dilutions: up to 40:1 for cutting, and 55:1 for grinding ULTRACUT* EVO 250 ULTRACUT* 250 HW ULTRACUT* EVO 255 ULTRACUT* 255 HW ULTRACUT* EVO 260 ULTRACUT* EVO 280 ULTRACUT* 370...

ULTRACUT 500 Series Neat Cutting Oils CUTTING FLUID The ULTRACUT 500 series are formulated from highly refined mineral oil and are formulated for the severest cutting operations. ® ULTRACUT 550 High performance EP neat oil cutting fluid Formulated for medium to severe cutting operations Contains EP additives – formulated to give superior performance and extend tool life Excellent residual corrosion protection Also suitable for: thread grinding, broaching, gear cutting and deep hole drilling Part code ULTRACUT 560 High performance chlorine free EP neat oil cutting fluid All the characteristics...