Geo. Robson & Co. Airport Baggage Mechanical Handling Solutions offer the ultimate for speed, reliability, robustness and product life. With a range of conveying solutions to suit the most challenging of sites and surroundings. Robsons offer conveyors configured for Weighing, Sorting, Security, X-Ray, Out of Gauge, Diverting Horizontally and Vertically. With Merging capabilities, Incline and Decline plus Power Bends, Robsons take the lead for the total solution package. The pusher is designed to push bags off at a maximum rate of 45 bags per minute. The pusher is rigidly constructed and mounted to withstand impact from a maximum specified single bag weight at the belt speed identified. The pusher is mounted on a fabricated frame complete with shock absorbing feet. The pusher is deployed by a 2.2 Kw geared motor unit. The output shaft of the geared motor unit is equipped with a timing belt pulley which drives a pair of drive pulleys via a timing belt tensioned by two spring loaded devices. Each drive pulley is connected to a drive shaft which runs in upper and lower bearings and at the lower end connects to a pivot arm via upper and lower locking nuts. The other end of each pivot arm runs in a pair of bearings mounted in the pivot arm located over a pivot pin. The pivot pin is welded to the pusher arm and one pusher arm connects to the pusher blade by a metalastic bush and the other pusher arm is welded to the pusher blade. The face of the pusher blade is covered with a damping/isolation pad. The Horizontal Pusher is suitably guarded with both weld mesh and mild steel plate guarding as appropriate. Geo. Robson & Co. (Conveyors) Ltd Coleford Road, Sheffield, S9 5PA Tel. +44 (0)114 2444221 Fax. +44 (0)114 2433066 [email protected] www.robson.co.uk

Pusher Retracted Pusher Extended Geo. Robson & Co. (Conveyors) Ltd Coleford Road, Sheffield, S9 5PA Tel. +44 (0)114 2444221 Fax. +44 (0)114 2433066 [email protected] www.robson.co.uk