P/N IP 50
1 / 8Pages

Systems Dynamic Test Cornering Fatigue Test System for Disk Wheel Stress Screening Testing P/N IP 50 Subject to technical changes!

Cornering Fatigue Test System IP50 Dynamic Test Systems

Cornering Fatigue Test Machine IP50 The IP 50 cornering fatigue test system has been designed to test the durability of wheels for trucks, light commercial vehicles and vans. It comprises cornering fatigue test machine IPM 50 and control cabinet IPE 50. The wheel is loaded in the horizontal plane by introducing a cornering bending moment in the wheel support. The wheel flange is firmly connected with the mounting plate and thus with the machine. Adaptation to different wheel widths and inset values is carried out by a motor-driven lifting device. The stationary moment shaft is secured via...

Cornering Fatigue Test Machine IP50 RlflS The displacement of the moment shaft, with reference to the 1000 mm long lever arm, is measured with laser distance measuring equipment. The drive consists of a asynchronous motor and a frequency inverter. Control and actual-value output are carried out by the Testmanager SWR1200/2, the set point selection and parameter configuration is done with the IPR60 software which runs on an industrial PC — the IPR50 Test Manager. Performance Data Bending moment 2 - 50 kNm Measured Data Bending moment: Strain gauge measuring hub with two separate...

Cornering Fatigue Test Machine IP50 RlflS Control Cabinet Dimensions: Weight: Colour: Protection type: W: 600 mm x D: 800 mm x H: 2000 mm high, plus 150 mm (base with rollers) approximately 200 kg RAL 7035 IP 54 Power Rating Power supply: Power consumption: Mains fuse: Connection: 18 kVA 3x25 A Power Cable with 32 A CECON connector Rl\/ls Regelungs-und Messtechnik • Dynamic Test Systems GUTENBERGSTRASSE 27 • D-21465 REINBEK/HAMBURG • GERMANY TEL 040 / 727 603-0 • FAX 040 / 722 40 66 • email: info@rms-testsystems.de

Dimensions: Rl\/ls Regelungs-und Messtechnik • Dynamic Test Systems GUTENBERGSTRASSE 27 • D-21465 REINBEK/HAMBURG • GERMANY TEL 040 / 727 603-0 • FAX 040 / 722 40 66 • email: info@rms-testsystems.de

RMS worldwide distribution and service network Headquarters Hamburg / Germany ANSCHRIFT / CONTACT RMS Regelungs- und Messtechnik Dynamic Test Systems Gutenbergstrasse 27 21465 Reinbek / Hamburg Germany Tel.: +49 (0)40 727 603-0 Fax: +49 (0)40 722 30 66 info@rms-testsystems.de www.rms-testsystems.de