FER 102/202
FER 102/202
- Design: Gearless electrical direct drive with integrated amplifier and controller.
- Torque: Continuous torque for FER 102 is >20 Nm up to 2500°/s, and for FER 202 is 40 Nm, 120 Nm over 10 sec.
- Supply Voltage: FER 102 operates at 12V, and FER 202 at 24V.
- Dimensions: Both models have a control rack size of 480x135x400mm.
- Environmental Conditions: Operating temperature range is -10 to +50°C, and storage range is -40 to +70°C.
- Supports various motion sequences including ramp, step, and sine tests as per ISO 7401.
- Capable of recording and processing internal and external data, including angle, velocity, and torque.
- Includes ergonomic design features and robust construction for durability.
- Equipped with a precision steering torque measuring hub and universal steering wheel adaptation.
- Analogue and digital inputs/outputs with configurable options.
- Standard and optional configurations for data recording and processing.
- Emergency stop and dead man's switch for safety.
- Compact housing for power components and signal processing.
- Ultra-light steering wheel with low inertia.
Catalog excerpts
Systems Dynamic Test Steering Robot Technical subject to changes without prior notice!
Open the catalog to page 1
Software and functions • Motion segments for free programming of motion sequences • External trigger to control motion sequences (digital, analogue, CAN) • Fishhook in accordance with NHTSA • Standard tests (ramp, step, sine,...) in accordance with ISO 7401 • Recording of internal or external data (angle, velocity, torque, digital inputs, analog • inputs, CAN,TDMS-file) • Manoeuvre assistent (SWD, SIS, etc.) • All tests as steering angle or steering torque • Play out of recorded profiles (file) • Processing of external data (analogue or CAN) • Extended configurable data recording after end of...
Open the catalog to page 2
Technical Data Type: FER102 / FER202 Design: Gearless electrical direct drive including amplifier and controller with integrated measuring device for steering angle and steering torque. Processing of recorded data (file) Processing of external data (analouge or CAN) Manoeuvre assistant (SWD, SIS, etc.) Operation modes for control unit • Free programmable motion sequence Motion sequence as angle or torque Motion segments step, delay, sine • Measurement steering wheel function Steering Wheel Suitable for road traffic, not TUV-approved (German Goverment Testing Laboratories) Diameter Load...
Open the catalog to page 3
[email protected] www.rms-testsystems.de
Open the catalog to page 4All RMS catalogs and technical brochures
P/N IP 508 Pages
TR 31/22 Pages
SM 1058 Pages
TEE62-28 Pages
PMC-TESTER TEE612 Pages
- Test bench
- Aeronautical test bench
- Aeronautical testing machine
- Testing machine
- Material testing machine
- Testing machine for the aerospace industry
- Motor test bench
- Automatic testing machine
- Vertical testing machine
- Vibration testing machine
- Temperature test bench
- Pressure testing machine
- Fatigue testing machine
- Motor testing machine
- Horizontal testing machine
- Electric testing machine
- Pneumatic testing machine
- Noise testing machine
- Generator testing machine