Complete Sensor System for Kinematic Laser Scanning • complete, compact & lightweight kinematic LiDAR system • fully integrated RIEGL VUX-1 Series LiDAR sensor • various mounting options for highly flexible installation • repared for remote control via p low-bandwidth data link • fully integrated system versions with application-oriented IMU/GNSS unit • compact control unit with various interfacing options • operates up to 4 digital cameras The RIEGL VUX-SYS is a completely integrated laser scanning system of low weight and compact size for flexible use in kinematic applications (e.g. UAS/UAV/RPAS, helicopter, gyrocopter and ultra-light aircraft installations). The system comprises a RIEGL VUX-1 Series LiDAR Sensor, an IMU/GNSS system and - if applicable - a dedicated control unit. The excellent measurement performance of the VUX-1 in combination with the precise inertial measurement unit and the associated GPS/GLONASS receiver results in survey-grade measurement accuracy over its full range of applications. The VUX-SYS is specifically designed to be easily installed or exchanged by the user, alternatively either in the RIEGL VP-1 HeliCopterPod, the RiCOPTER unmanned aerial system, or in any kinematic measuring system, whatsoever. The VUX-SYS provides interfaces for controlling up to four digital cameras. When installed in the VP-1 HeliCopterPod or the RiCOPTER UAV the VUX-SYS is complemented by up to two cameras. The small size, low weight, and small number of interconnecting cables required account for a very short set-up time of the system. The VUX-SYS is delivered with the necessary software tools for processing scan data as well as IMU/GNSS data. Based on the software bundle RiPROCESS and its associated software tools, scan data is geo-referenced, calibrated and exported fully automatically. RIEGL offers an optional system calibration service. Typical applications include • Corridor Mapping: Power Line, Railway Track, and Pipeline Inspection • Terrain and Canyon Mapping • Surveying of Urban Environments • Topography in Open-Cast Mining • Agriculture & Forestry • Archeology and Cultural Heritage Documentation • Construction-Site Monitoring visit our website www.riegl.com

RIEGL VUX®-SYS - Integration Options RIEGL VUX-1 with APX-20 UAV / AP+30 interface for 4 optional cameras available Main Dimensions VUX-1 with IMU VUX-1 with IMU and Cooling Fan Device VUX-1 with IMU Cooling Fan Device approx. 4.2 kg / approx. 4.3 kg approx. 0.25 kg depending on selected camera type antenna (symbolic image) camera (symbolic image) RIEGL VUX-SYS with APX-20 UAV with separate control unit accommodating the GNSS board stack as well as the camera trigger electronics for up to 4 optional cameras Main Dimensions VUX-1 with IMU 295 x 180 x 125 mm VUX-1 with IMU and Cooling Fan Device...

RIEGL VUX®-SYS System Installation RIEGL VUX®-SYS installed in RiCOPTER (Unmanned) The VUX-SYS fits the dedicated mounting bay of the RiCOPTER directly without any adaptations. The system is supplemented by two digital cameras, covering a field of view of approximately 160 degrees, where as the VUX-SYS covers a FOV of 230°. The low weight of the VUX-SYS enables the RiCOPTER to operate up to half an hour at a gross weight of 25 kg. control unit FPV camera for video downstream thermal camera - optional (e.g. Flir Tau 2) IMU/GNSS unit RIEGL VUX-SYS for RiCOPTER System Components: • RIEGL VUX-1UAV...

RIEGL VUX®-SYS Technical Data Scanner Performance (for details refer to the corresponding RIEGL data sheets) RIEGL VUX-1 Series Sensor Maximum Range Minimum Range Accuracy / Precision Laser Pulse Repetition Rate Max. Effective Measurement Rate Field of View (selectable) 3) Max. Scan Speed 2) 1) ot recommended to be seen as a first choice for N ALS and UAV applications because of its lower range capability. up to 1,800 kHz up to 1,500,000 meas./sec. up to 1,200,000 meas./sec. up to 1,800,000 meas./sec. u p to 360° up to 360° up to 360° 200 scans/sec 200 scans/sec 250 scans/sec 2) Maximum range...