*myaeroexpo

Catalogs
RIEGL LASER MEASUREMENT SYSTEMS GMBH
RIEGL VP-1 with RIEGL VUX-240

RIEGL VP-1 with RIEGL VUX-240

Product catalog summary

Overview: The RIEGL VUX-240 Airborne Laser Scanner is designed to integrate seamlessly into the RIEGL VP-1 Helicopter Pod, which is compatible with standard hard points and camera mounts on manned helicopters. The system allows for quick installation and removal due to quick release adapter brackets and minimal external cabling requirements.

Typical Applications: The system is suitable for various applications including corridor mapping, archaeology and cultural heritage documentation, terrain and canyon mapping, flood zone mapping, urban environment surveying, topography in open-cast mining, construction-site monitoring, power line, railway track, and pipeline inspection, accident investigation, and emergency management planning.

Technical Specifications:

Laser Class: 3R
Max. Effective Measurement Rate: Up to 1,500,000 measurements per second
Max. Range: 1200 meters at 20% target reflectivity
Minimum Range: 5 meters
Accuracy/Precision: 20 mm / 15 mm
Field of View (FOV): 75°
Total Weight: Approximately 20 kg, depending on configuration

System Components: The system includes the RIEGL VUX-240 LiDAR sensor, an IMU/GNSS unit with GNSS antenna, a control unit, and optional digital cameras.

IMU/GNSS Unit Specifications:

Applanix AP20: Roll, Pitch accuracy of 0.015°, Heading accuracy of 0.035°, Position accuracy of 0.05 m - 0.3 m
Applanix AP50-Air: Roll, Pitch accuracy of 0.005°, Heading accuracy of 0.010°, Position accuracy of 0.02 m - 0.05 m

Installation and Operation: The system supports quick installation and removal using existing mounts such as the AirFILM Camera System. The area exposed to wind is 0.114m². Operation and data acquisition are managed with RiACQUIRE software.

Compliance and Safety: The RIEGL VUX-240 is a Class 3R Laser Product compliant with IEC60825-1:2014 and U.S. regulations as per Laser Notice No. 56.

Catalog excerpts

with integrated RIEGL VUX-240 1200m 1.8MHz The RIEGL VUX-240 Airborne Laser Scanner smoothly fits into the small and lightweight RIEGL VP-1 Helicopter Pod, designed to be mounted on standard hard points and typical camera mounts of manned helicopters. Quick release adapter brackets and minimum external cabling (i.e. power supply, LAN, GNSS antenna) allow quick system installation and removal. Helicopter Pod for Airborne Laser Scanning (ALS) Typical Applications • Corridor Mapping • Archeology and Cultural Heritage Documentation • Terrain and Canyon Mapping • Flood Zone Mapping • Surveying of Urban Environments • Topography in Open-Cast Mining • Construction-Site Monitoring • Power Line, Railway Track, and Pipeline Inspection • Accident Investigation • Emergency Management Planni

Open the catalog to page 1

RIEGL VP-1 with VUX-240 Technical Data PhaseOne IXM RGB camera Flir TC2 thermal camera RIEGL VUX-240 LiDAR sensor RIEGL VUX®-240 Sensor System System Components RIEGL VUX-240 LiDAR sensor IMU/GNSS unit with GNSS antenna control unit digital cameras (optional) Scanner Performance refer to VUX-240 table below Total Weight approx. 20 kg (depending on INS/GNNS unit and camera configuration) IMU/GNSS Unit RIEGL VUX-240 Airborne Laser Scanner accuracy Roll, Pitch / Heading 0.015° / 0.035° 200 Hz IMU sampling rate 0.05 m - 0.3 m position accuracy (typ.) Camera Interfaces trigger and event marker Technical...

Open the catalog to page 2

RIEGL VP-1 with RIEGL VUX-240

RIEGL VP-1 with RIEGL VUX-240

Catalog excerpts

All RIEGL LASER MEASUREMENT SYSTEMS GMBH catalogs and technical brochures