LD05e-HT
4Pages

Catalog excerpts

DIGITAL LASER DISTANCE METER The RIEGL LD05e-HT is a multipurpose laser distance meter based on precise time-of-flight laser range measurement. It uses state-of-the-art digital signal processing enabling precise distance measurement for complex multi-target situations even under bad visibility conditions. It is additionally optimized for very high target temperatures. Digitizing the echo signal and subsequent analyzing allows multi-target distance measurements. Five target distances can be detected and provided for each laser shot. The LD05e-HT can be configured for various application modes: • High Penetration Mode for complex target situations, based on a sequence of laser shots, self-adapting (rather low) data update rate Significant enhancement of the maximum range based on Pre-Detection-Averaging • Fast Mode with an update rate between High Penetration Mode and High Speed and Mode • Short infrared laser pulses providing excellent interference immunity • Narrow measurement beam with low divergence for excellent spatial resolution • Measurement to almost any surface regardless of the angle of incidence of the beam and the surface characteristics • Lightweight, stable aluminium housing, ready to be used in harsh industrial environments. • Different basic instrument types with pre-configured measurement modes, but also individually programmable for customer specific applications visit our webpage www.riegl.com

Open the catalog to page 1

Technical Data LD05e-HTPerformance Examples High Penetration Model www.riegl.com Data Sheet RIEGL LD05e-HT, 2017-11 -23, page 2 of 4 The following conditions are assumed • target is larger than footprint of laser beam, • perpendicular angle of incidence, • visibility 10 km • typical values for average ambient brightness conditions. In bright sunlight, the operational range is considerably shorter than under an overcast sky. At dawn or at night the range is even higher. Reflecting foil 3M DG4090 or equivalent, dimensions > 0.45 x 0.45 m2 . Minimum distance 3m for full accuracy with...

Open the catalog to page 2

Technical Data LD05e-HTLaser Specifications Wavelength 1) Measured at the 1/e2 points.lmrad corresponds to 10 cm beam width per 100 m distance. 1) The life expectancy (MTBF) of the instrument is reduced in case of operation and/or storage at high temperatures. 2) Operating range selectable via serial interface. 3) Switching points adjustable via serial interface. www.riegl.com Data Sheet RIEGL LD05e-HT, 2017-11 -23, page 3 of 4

Open the catalog to page 3

Technical Data LD05e-HT Dimensional Drawings All dimensions in mm Copyright RIEGL Laser Measurement Systems GmbH © 2017 – All rights reserved. Use of this data sheet other than for personal purposes requires RIEGL’s written consent. This data sheet is compiled with care. However, errors cannot be fully excluded and alternations might be necessary. Data Sheet RIEGL LD05e-HT, 2017-11-23, page 4 of 4 RIEGL Laser Measurement Systems GmbH, 3580 Horn, Austria Tel.: +43-2982-4211, Fax: +43-2982-4210, E-mail: office@riegl.co.at RIEGL USA Inc., Orlando, Florida 32819, USA Tel.: +1-407-248-9927, Fax:...

Open the catalog to page 4