DIGITAL LASER DISTANCE METER The RIEGL LD05e-A10 is a multi-purpose laser distance meter based on precise time-of-flight laser range measurement. It uses state-of-the-art digital signal processing enabling precise distance measurement for complex multi-target situations even under bad visibility conditions. Digitizing the echo signal and subsequent analyzing allows multi-target distance measurements. Five target distances can be detected and provided for each laser shot. The LD05e-A10 can be configured for various application modes: • High Penetration Mode for complex target situations, based on a sequence of laser shots, self-adapting (rather low) data update rate Significant enhancement of the maximum range based on Pre-Detection-Averaging • Fast Mode with an update rate between High Penetration Mode and High Speed and Mode • High Speed Mode for simple target situations, high data update rate • Short infrared laser pulses providing excellent interference immunity • Narrow measurement beam with low divergence for excellent spatial resolution • Measurement to almost any surface regardless of the angle of incidence of the beam and the surface characteristics • Lightweight, stable aluminium housing, ready to be used in harsh industrial environments. • Different basic instrument types with pre-configured measurement modes, but also individually programmable for customer specific applications visit our webpage www.riegl.com

Technical Data LD05e-A10Performance Examples High Penetration Mode 1) The following conditions are assumed • target is larger than footprint of laser beam, • perpendicular angle of incidence, • visibility 10 km • typical values for average ambient brightness conditions. In bright sunlight, the operational range is considerably shorter than under an overcast sky. At dawn or at night the range is even higher. 2) Reflecting foil 3M DG4090 or equivalent, dimensions > 0.45 x 0.45 m2 . 3) Minimum distance 3 m for full accuracy with reflecting foil and minimum distance 5 m for full accuracy with plastic...

1) The life expectancy (MTBF) of the instrument is reduced in case of operation and/or storage at high temperatures. 2) Operating range selectable via serial interface. 3) Switching points adjustable via serial interface. Data Sheet RIEGL LD05e-A10, 2017-12-06 page 3 of 4

Technical Data LD05e-A10 Dimensional Drawings All dimensions in mm Copyright RIEGL Laser Measurement Systems GmbH © 2017 – All rights reserved. Use of this data sheet other than for personal purposes requires RIEGL’s written consent. This data sheet is compiled with care. However, errors cannot be fully excluded and alternations might be necessary. Data Sheet RIEGL LD05e-A10, 2017-12-06 , page 4 of 4 RIEGL Laser Measurement Systems GmbH, 3580 Horn, Austria Tel.: +43-2982-4211, Fax: +43-2982-4210, E-mail: [email protected] RIEGL USA Inc., Orlando, Florida 32819, USA Tel.: +1-407-248-9927, Fax:...