RM-3006 Bismaleimide (BMI) Paste Adhesive
4Pages

RM-3006 BISMALEIMIDE (BMI) PASTE ADHESIVE FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS

RM-3006 Bismaleimide (BMI) Paste Adhesive Product Information Developed using state-of-the-art formulating technologies, RM-3006 BMI Paste Adhesive is a -65oF to 400oF (-54oC to 204oC) service material. RM-3006 was developed for use with Renegade's BMI Prepregs and Infusion Resins as well as other industry standard BMI systems and metals. Renegade does not impose minimum order quantities or large set up charges for small quantities like many of our competitors. Renegade stores key raw materials to support short lead times. Our customers are able to buy in the quantities they need when they...

Notes: Adhesive testing done on 2024-T3 aluminum (AMS 4037) cleaned by phosphoric acid anodizing (ASTM D 3933) and bonded within eight (8) hours. Renegade Recommended Cure Cycle for RM-3006 RM-3006 should be heated to about 150 - 160oF for 5 - 10 minutes and then used like a standard paste adhesive. Renegade's recommended cure process combines the cure and post cure cycle into one out of autoclave cure schedule. The cure shall be done freestanding using deadweight, clamps or a press. Step 1. Heat the part to 375 ± 10°F at a rate of 1 to 5°F per minute. Limit the free air temperature to...

About Renegade Renegade Materials Corporation is a global leader in manufacturing composite materials for aerospace applications. We deliver light-weight, highly-engineered prepregs, adhesives and hybrid composite systems to enable maximum fuel efficiency in commercial and military aircraft structures. To request pricing, request an MSDS or to get additional information on Renegade products, please call us at 937-350-5274 or visit our website at www.renegadematerials.com This document and any pricing provided on this product, are considered proprietary, confidential and...