CNC-machining centre Control system Control system with integrated safety concept The ARTIS-X is equipped with the latest generation of control systems, the Sinumerik 840D solution line (sl) of Siemens make, whose openness and modular system architecture perfectly match the design concept of the ARTIS-X. The machine is operated and programmed in a Technical Features time-saving and intuitive manner by means of a graphic user surface (NC-HOPS). Above all, the control system is able to handle the short reaction times resulting from the high processing speeds. This means that the ultimate machining precision is even guaranteed during high-speed milling. The high speeds also require a sophisticated safety concept. With its safety concept Safety Integrated the Sinumerik 840D sl offers the best conditions in this regard. As all the safety functions are directly integrated into the control and drive technology, this intelligent solution provides a high level of protection for man and machine whilst featuring convenient handling. Working unit Cardanic working head Tool changer ARTIS X4 • quick learnability • efficient working environment • graphic identification (click to get) • extensive processing functions • reusable macros (libraries) • side-neutral processing Tool diameter 20 mm Total tool length 120 mm X = 4,020 mm, Y = 1,390 mm, Z = 390 mm (vertical spindle position) Machine table HPL-table plate (plain or grooved) 6,020 mm x 1,400 mm Portal passage 390 mm Axes movements X-axis 6,665 mm - maximum 70 m/min Y-axis 1,550 mm - maximum 70 m/min Z-axis 530 mm - maximum 20 m/min Working area 5-axes operation Tool diameter 20 mm Total tool length 120 mm X = 6,000 mm, Y = 1,390 mm, Z = 390 mm (vertical spindle position) Additional equipment 5-axes trimming with the tool edge, programmed in AlphaCAM X-axis 4,685 mm - maximum 70 m/min Y-axis 1,550 mm - maximum 70 m/min Z-axis 530 mm - maximum 20 m/min Working area 5-axes operation ARTIS X6 • tool-specific positioning of the working head • support of the positioning aids for pods and components • workshop-oriented system HPL-table plate (plain or grooved) 4,270 mm x 1,400 mm Portal passage 390 mm Axes movements Door frame elements with 5-axes machining and layout, programmed in NC-HOPS The automatic tool changer system is inside the portal. A magazine plate with 22 tool places is integrated, maximum tool diameter 300 mm, maximum tool length 240 mm (or chain magazine with 36 places), pick-up place as an option. Machine table Licom AlphaCAM is a modular CAD/CAM system for wood and plastics processing. The emphasis lies on the programming on solid models, the graphic parametric, excellent nesting solutions and many other highlights, from the 2.5D up to 5-axes milling. Multi-spindle drilling unit in L-shape with 15 vertical and horizontal drilling spindles Multi-spindle drilling unit in L-shape with 25 vertical and horizontal drilling spindles Manual or automatic beam table, vacuum system up to 250 m3, chip removal belt, special clamping devices, laser projection system, modem for tele-diagnostic, barcode scanner, software for the graphically supported programme generation. Control system Nc-Hops Using NC-HOPS as a CAD/CAM solution permits the visual development of dynamic parts within a very short time. Thanks to the machineneutral component description, timeconsuming movements, positioning processes and special functions do not need to be programmed at the machine. B-axis, swivelling range +/- 180°, C-axis, swivelling range +/- 360° Drilling unit Performance 14.0/16.8 kW, maximum performance as of 18,000 rpm Number of revolutions programmable from 500 – 24,000 rpm (in steps of 100 rpm) Tool fixtures with hollow cone shank HSK-F63 Siemens Sinumerik 840D sl (Solution Line) Reichenbacher Hamuel GmbH Rosenauer Straße 32 · D-96487 Dörfles-Esbach Phone: +49 (0)9561-599-0 · Fax: +49 (0)9561-599-199 [email protected] · www.reichenbacher.com 04/ 13 → taking into consideration a

Universal application for the most different workpieces in the furniture and interior production -furniture parts today, tomorrow an interior part and the day after a solid wood part for stairs. For numerous machining tasks, such as formatting, profiling, drilling, grooving and separating with material like MDF, chip or core boards, solid wood, plastics and many more. Flexible CNC-technology for the woodworking industry Versions High quality of repeat parts and flexibility for small quantities are the typical requirements of most small and medium-sized joinery shops. With the ARTIS-X, Reichenbacher Hamuel...