Hydrant Pit Cleaning Vehicle

Product catalog summary

Overview
The document describes the Refuel International Quality Control and Hydrant Pit Cleaning vehicle, designed for safe flushing of unused hydrants and system low points, with efficient containment and storage of liquids. It features a 2,700-litre cargo tank and a 1,000-litre vacuum tank, with an additional 1,000-litre water compartment for pressure washing.

Vehicle Specifications

Chassis: ISUZU 4x2 cab/chassis.
Tanks: 4,000-litre two-compartment tank (3,000-litre slops tank and 1,000-litre water tank) and a 1,000-litre vacuum tank.
Frame: All-steel, welded, hot-dip galvanized structure.

Functional Components

Hydrant System: Equipment for sampling, flushing, cleaning, and repairs.
Safety Features: Includes brake interlock, emergency stop, roll-over sensor, and engine strangler.
Hydraulic Crane: Mounted at the rear for lifting pit valves.

Major Functions

Hydrant low point flush.
Hydrant pit cleaning with water and vacuum/suction system.
Hydrant drying with air pressure.
Transfer pumping system.

Technical Features

Electrical: 24V system with master isolator switch.
Hydraulics: PTO-driven pump for various operations.
Pneumatics: Uses vehicle air supply with typical pressure of 800+kPa.
Interlocks: Prevents vehicle movement when components are unstowed.
Meter: SAMPI M7 type with ERP Pulser for intake measurement.

Additional Equipment

Low Point Sample/Flush: Hydraulic rewind drum with dry-break coupling.
Vacuum Tank & Suction System: Includes suction pump with strainer and pre-filter.
Water Tank with High Pressure Pump: Spring-rewind reel with water hose and nozzle.
Air-Dry Hose Reel: Spring-rewind reel with air hose and nozzle.
Transfer Pump: Hydraulically driven for liquid transfer.
Crane: Hydraulic, slewing type with extendable boom.
Collector Tank: 90L with diaphragm pump evacuation.
Static Bonding Reel: Manual rewind with 30m cable.
Battery Boost Socket: Anderson Plug type.

Catalog excerpts

Pioneer of Refuelling Equipment & Support Services HYDRANT PIT CLEANING VEHICLE innovate · create · execute 602-606 Somerville Road Sunshine West VICTORIA 3020 AUSTRALIA T +61 3 8311 6600 | F +61 3 9364 7054 E [email protected]

Open the catalog to page 1

WATEF TANK 380 L TflES CAP>ClT¥ CLtw. i a VACUUM i ‘ 1000 LITRE: CAPAan, HYDRANT SERVICE VEHICLE Unit’s basic description and functions ... At a glance The vehicle has low-point flushing into the main slops tank, a vacuum pumping system, a stand-alone transfer pump and high pressure water and air reels. In additional to the flushing and vacuum systems, an hydraulically operated crane is mounted at the rear right corner of the vehicle to facilitate lifting of pit valves etc. All pneumatics are supplied by the compressor installed behind the cab and the hydraulic system pump is driven by a PTO...

Open the catalog to page 2

Electrical Hydraulics Pneumatics Interlocks / vehicle Immobilisation system Meter LOW POINT SAMPLE / FLUSH Hose-reel & Dry-Break coupling 2,740L SFL JET SLOPS TANK 1,000L VACUUM TANK & SUCTION System 1,000L WATER TANK with High Pressure PUMP, REEL & NOZZLE AIR-DRY HOSE REEL & NOZZLE TRANSFER PUMP COLLECTOR TANK Static Bonding Reel Battery Boost Socket 24V, 7-pin master isolator switch Remote / Separate Red & green ON-OFF buttons located on chassis, behind cab RHS behind cab Hydraulic pump driven by PTO Provides power for Pumps, rear crane and hydraulic Hose Reel Rewinds. System uses vehicle...

Open the catalog to page 3

Hydrant Pit Cleaning Vehicle

Hydrant Pit Cleaning Vehicle

Catalog excerpts

All REFUEL INTERNATIONAL catalogs and technical brochures