APU 800 E

APU 800 E

Product catalog summary
Overview: The APU 800E is a portable ground power unit designed for aircraft, providing a 28VDC power supply with a continuous current of 800A and a peak of 2400A. It is suitable for both military and civilian aircraft, including helicopters, and is particularly useful for service checks, engine starts, and battery management.
Specifications: The unit features electronically controlled, variable DC voltage (5-30V) and current limiting (0%-100%). It is designed to handle continuous loads of 800A, with overload capacities ranging from 900A to 2000A for short durations, and a peak capacity of 2400A. The unit is environmentally friendly and does not require a battery.
Design and Features: The APU 800E is compact, user-friendly, and manufactured to meet IEC, EN, VDE, and CE standards. It includes a splash-proof design with pneumatic tires, a parking brake, and a lockable main switch with an emergency stop function. The control panel is protected and features labels in both German and English, along with digital displays for DC output parameters.
Operating Modes: The unit supports three operating modes: service, engine wash, and engine start. It is equipped with protection and monitoring devices for short circuits, overloads, phase failures, overvoltage, overtemperature, and reverse current.
Standard and Optional Features: Standard features include a Schuko socket with galvanic isolation, a soft start mechanism, and high efficiency with low maintenance requirements. Optional features include various mains cable lengths, special paint coatings, and different socket types.
Order Information: The APU 800E model AIRFIELD has an order number of 1SI4-1111-01100 and weighs approximately 260 kg. It requires a separate mains cable order and offers various customization options, including special paint coatings and additional cable types.
See more

Catalog excerpts

APU 800 E-1

Ground power unit for aircraft 28VDC, 800A Modell AIRFIELD, with current and voltage regulation, Peak 2400A APU 800E Model AIRFIELD Standard features Operating modes o [1] Service Load capacity o 800 A continuous o 900 A - 2000 A overload 30 s - 2 s o 2400 A peak, insensitive to current spikes in connected loads User-friendly, compact and practical design Manufactured and tested to IEC, EN, VDE and CE standards Made in Germany Order data for the unitsModel, unit Order no Output APU 800E 1SI4-1111-01100 1) 28VDC 1) Factory additions and modifications on different models Order data for options Specity in additionOrder no Description 2L0205-026-001 2L0205-026-002 Portable ground power unit for airfield and hangar deployment Suitable for providing a 28 VDC power supply to engine, turbine and turboprop aircraft, as well as for military and civilian helicopters, for their on-board systems. Especially suitable for o Service and function checks o Start assistance and direct start of engines o Compressor wash o Battery charging, battery discharging o Supply of on-board electrical system without battery o Current requirement to 800 A continuous operation for lights, hydraulic system, air conditioning, on-board electrical system and avionics. o Portable unit, splash-proof, with drawbar and 3 Cable hangers. o Colour RAL 9016 (Traffic White). o Chassis with pneumatic tyres and parking brake. o High mobile and stationary stability. o Mains cable, rugged, for 3-phase 400 VAC power supply, length 15/30 m*, plug 5x63A (CEE standard IEC 60309-.). o Lockable main switch with EMERGENCY STOP function. o Protected, clear control panel, labels in German and English, with command and signalling devices and digital display devices for DC output parameters. o On-board connection cable, standard length 5 m, with rubber aircraft connector MS25488 (oval), rugged version. o Soft start, with overloading protection, protection and monitoring devices for short circuit, overload, phase failure, overvoltage, overtemperature and reverse current. o Schuko socket 230 VAC 4.5 A with galvanic isolation. o High efficiency, low weight, maintenance-friendly. o Models with various options available. Mains Weight, Dimensions, approx. connection/connector approx. mm Mains cable must be 1375 ordered separately * RECK SOLAR & ELME Elektromechanik GmbH - Wolfenmuhleweg 12-12/1 - 88348 Bad Saulgau - Germany • Telefon 0821- 70 40 68 • Fax 0821-70 27 45 • E-Mail [email protected] • Internet www.elme-augsburg.de Technische Anderungen vorbehalten- Alle Angaben sind fur die Lieferung nicht verbindlich • Es gelten unsere Geschaftsbedingungen • Made in Germany 15 m mains cable with round plug 400V 5x63A 30 m mains cable with round plug 400V 5x63A Schuko socket DIN 49440, CEE7/4, Type F, single-phase 230 VAC 4.5 A with galvanic isolation (standard feature) CEE round socket IEC60309-2 grey, tT 12h,16A, single-phase 230 VAC 4.5 A with galvanic isolation Swiss socket with PE contact SEV 6535 type 13,10A, 1Ac 230V 4,5A with galvanic isolation Special paint coating RAL 3000 (Flame Red) and RAL 7035 (Light Grey) BC standard Special paint coating MIL standard RAL 1007 (Chrome Yellow) Special colour (please state when ordering) 5 m on-board connection cable with aircraft connector MS25487 (rectangular) heavy-duty version

 Open the catalog to page 1

All RECK SOLAR und ELME ELEKTROMECHANIK GmbH catalogs and technical brochures

  1. APU 400 E

    1  Page

  2. APU 350 E

    1  Page

  3. APU 200 E

    1  Page

  4. APU 100 E

    1  Page

  5. APU 100 E

    1  Page

  6. APU 200E

    1  Page

  7. APU 350 E

    1  Page

  8. APU 400/1600

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.