APU 200E Ground power unit for airplane, helicopter 14/28VDC 200A Application Mobile ground power supply for indoor applications This model is provided without auxiliary batteries and ist suitable for the maintenance area of motor-, turbinen- and turboprop - aircraft and helicopter for the military and civilian sector. o Universal unit for hangar for onboard power supply for aircraft with 14 or 28VDC. The wide range version also coincide 7V electrical systems. Adjustable current limitation For supplying the onboard electrical system with high-quality DC voltage for gauging, calibrating and for execute function checks For battery charging with programmable time control This model is available with different equipment that meets the requirements in every situation. The infinitely adjustable and regulated DC output voltage enables precise simulations in the under- and overvoltage range. Model: 1SE.-4… 5…32VDC o infinitely adjustable and stabilized DC output voltage, Electronically regulated, low residual ripple, stability +/-1% Current rating o 200A continuous duty, till 250A peak, infinitely adjustable current o o limitation Equipment with 2 operating modes: (1) service-duration operating mode for on-board power supply for an unlimited period of time. (2) service-timer Operating mode for battery charging and standby parallel operation with adjustable duty cycle, visual and acoustic notification when time has expired and switch-off. o o o o Simple operation Excellent weight to power ratio Equipped as standard with servic socket 230V 4,5A via an isolation transformer (galvanic isolation). Compact and practical design Mobile unit for indoor use, robust sheet steel housing, smoothrunning pneumatic tyres, handle, separate cable holder, high degree of mobile and stationary safety. Color RAL 9016 (traffic white). Mains connection cable for 3AC mains voltage, standard length 15m with cekon plug 5x16A (IEC 60309-.). Soft start. Lockable main switch with EMERGENCY STOP function. Protected control panel, labels in German-English, with command and signaling devices for operating and fault states. 2 operating modes Digital displays for DC output parameters. Cable for connection to onboard electrical system, standard length 5m, with aircraft connector made of hard plastic MS25488 (oval). DC-voltage according ISO, EN and MIL-standards. Overload-proof, protection and monitoring devices against short circuit, overload, phase failure, overvoltage, overtemperature, reverse current and varying residual ripple. Efficiency 90%, PFC 0,95 Model available with optional variants. Ordering information for devices Model, device Mains connection / plug 3AC400V, mainscable 15m connector Cekon 5x16A rt. 1) Factory additions and modifications on different models Order data für options Specify in addition 30m mains cable instead of 15m Earthed socket DIN 49440, CEE7/4, Typ F, 1AC 230V 6A with galv. isolation (isolation transformer) as standard Special paint finish RAL3000(red) and RAL7035 (grey) BC-standard Special paint finish MIL-standard RAL1007(daffodil yellow) 5m cable for connection fo onboard electrical system with robust rubber aircraft connector MS25488 (oval) 5m cable for connection fo onboard electrical system with robust rubber aircraft connector MS25487 (rectangular) RECK SOLAR & ELME Elektromechanik GmbH · Wolfenmühleweg 12-12/1 · 88348 Bad Saulgau · Germany · Telefon 0821- 70 40 68 · Fax 0821-70 27 45 · E-Mail [email protected] · Internet www.elme-augsburg.de Technische Änderungen vorbehalten· Alle Angaben sind für die Lieferung nicht verbindlich · Es gelten unsere Geschäftsbedingung