TBRE.CI
TBRE.CI
- A-Axis and C-Axis: Both axes have a maximum speed of 200°/sec. The continuous torque is 560 Nm for the A-axis and 1000 Nm for the C-axis. Intermittent torque is 770 Nm and 1560 Nm, respectively, with peak torque reaching 1000 Nm for the A-axis and 2000 Nm for the C-axis. Clamping torque is 4500 Nm for the A-axis and 10000 Nm for the C-axis. The hydraulic clamp rated pressure is a maximum of 120 bar for both axes. Total mechanical accuracy is +/- 10 arcseconds, and the angle rotation is +/-182° for both axes. The overall mass is 630 kg.
- Spindle Specifications: The tool types are HSK A63 and HSK 100, with a maximum spindle speed of 15000 rpm. Power is rated at 65 kW (S1 100% and S6 40%), and torque is 124 Nm under the same conditions. Bearings are lubricated with an oil/air system. The spindle manufacturer/model is HSD 6161 H1510.
- Electrospindle Dimensions: For HSK A63, dimensions are A: 525 mm, B: 350 mm, C: 100 mm. For HSK A100, dimensions are A: 560 mm, B: 350 mm, C: 135 mm.
Special versions of the electric spindle type are available upon request.
Catalog excerpts
TESTE DI FRESATURA – MILLING HEADS TECHNICAL DATA Maximum speed Continuous torque Intermittent torque Peak torque Clamping torque Hydraulik clamp rated pressure (max) Total mechanical Accuracy Angle rotation Overall mass RAM Srl – Via La Bella 237/A, 37015 Sant’Ambrogio di Valpolicella, VR (Italy) - www.ramht.com - [email protected] – tel. +39 45 6860999 1-2
Open the catalog to page 1
TESTE DI FRESATURA – MILLING HEADS TECHNICAL DATA Tool type Maximum spindle speed Power S1 100% (S6 40%) Torque S1 100% (S6 40%) Bearings lubrication type Spindle manufaturer/model ELECTROSPINDLE TYPE ** ** Electric spindle type on request We are available to supply special versions. RAM Srl – Via La Bella 237/A, 37015 Sant’Ambrogio di Valpolicella, VR (Italy) - www.ramht.com - [email protected] – tel. +39 45 6860999 2-2
Open the catalog to page 2
