K3
K3
- Head:
- Maximum speed for both A-axis and C-axis is 200°/sec.
- Continuous torque is 543 Nm for A-axis and 533 Nm for C-axis.
- Intermittent torque is 789 Nm for A-axis and 761 Nm for C-axis.
- Peak torque is 1030 Nm for A-axis and 935 Nm for C-axis.
- Clamping torque is 5000 Nm for both axes.
- Hydraulic clamp rated pressure is 100 bar (max 120) for A-axis and 60 bar (max 80) for C-axis.
- Accuracy encoders are +/- 10 arcsec for both axes.
- Overall mass is 600 Kg.
- Spindle:
- Tool types available are HSK A63 and HSK A100.
- Maximum spindle speed is 24000 Rpm for HSK A63 and 15000 Rpm for HSK A100.
- Power S1 100% is 42 Kw (S6 40% is 55 Kw) for HSK A63 and 50 Kw (S6 40% is 67 Kw) for HSK A100.
- Torque S1 100% is 67 Nm (S6 40% is 87 Nm) for HSK A63 and 95 Nm (S6 40% is 124 Nm) for HSK A100.
- Bearings lubrication type is Oil/Air for both models.
- Spindle manufacturer/model is HSD ES510 for both models.
- For HSK A63: A = 712, B = 273, C = 78.
- For HSK A100: A = 747, B = 308, C = 113.
Special versions are available upon request.
Catalog excerpts
TESTE DI FRESATURA – MILLING HEADS Head TECHNICAL DATA Maximum speed Continuous torque Intermittent torque Peak torque Clamping torque Hydraulik clamp rated pressure (max) Accuracy encoders Overall mass TECHNICAL DATA Tool type Maximum spindle speed Power S1 100% (S6 40%) Torque S1 100% (S6 40%) Bearings lubrication type Spindle manufaturer/model We are available to supply special versions. RAM Srl – Via La Bella 237/A, 37015 Sant’Ambrogio di Valpolicella, VR (Italy) - www.ramht.com - [email protected] – tel. +39 45 6860999 1-2
Open the catalog to page 1
TESTE DI FRESATURA – MILLING HEADS ELECTROSPINDLE TYPE RAM Srl – Via La Bella 237/A, 37015 Sant’Ambrogio di Valpolicella, VR (Italy) - www.ramht.com - [email protected] – tel. +39 45 6860999 2-2
Open the catalog to page 2
