R163/R143/R127/R327
23Pages

HIGH FREQUENCY CONNECTORS: N 18 GHZ TNC 18 GHZ/SMA 2.9/2.4 MM R163/R143/R127/R327 SIMPLIFICATION IS OUR INNOVATON Radlall Visit www.radiall.com for more information

Contents N 18 GHz Introduction.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4 to 10-5 Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

N 18 connectors are 50 ohm precision N Type connectors designed to perform through 18 GHz. N connectors are a popular medium sized option commonly used in microwave and RF applications that require high power handling and good electrical performance. Radiatt Type N connector interfaces utilizes a PTFE (Teflon) dielectric. The mate connectors are provided with a 19 mm (3/4 in.) hex coupling nut so they can be property torqued. Connector bodies are made from stainless steet, and contacts are made from gold plated and heat treated beryttium copper contacts to insure tong tife and...

N 18 GHz IMPORTANT: the 500 and the 750 connectors are NOT INTERMATEABLE, results in the interface destruction. mm Mating dimensions are MIL-C-39012 nominal with tighter tolerances and solid outer contact. Go online for data sheets & assembly instructions. Radlall J Visit www.radiall.com and enter the part number.

Characteristics Values/Remarks ELECTRICAL CHARACTERISTICS Go online for data sheets & assembly instructions. Radlall j" Visit www.radiall.com and enter the part number.

Plugs, Jacks and Adapters STRAIGHT PLUGS FOR SEMI-RIGID CABLES (-- 25.4 (1.0)--1 Cable group Note: N18 GHz plugs for SHF high frequency flexible cable are available as cable assemblies only. Consult us for standard N18 GHz cable assembly part numbers. BULKHEAD STRAIGHT JACKS, FOR SEMI-RIGID CABLES (panel sealed) Part number Note: 7mm air line adapters also available upon request. Go online for data sheets & assembly instructions. Radiall J Visit www.radiall.com and enter the part number.

Introduction TNC 18 connectors are 50 ohm precision TNC Type connectors designed to perform through 18 GHz. TNC connectors are a popular medium sized option commonly used in microwave and RF applications that require average power handling and good electrical performance. Radiall TNC connector interfaces utilizes a PTFE (Teflon) dielectric. The male connectors are provided with a 14 mm (9/16 in.) hex coupling nut so they can be properly torqued. Connector bodies are made from stainless steel, and contacts are made from gold plated and heat treated beryllium copper contacts to insure long...

Test / Characteristics Values / Remarks ELECTRICAL CHARACTERISTICS Go online for data sheets & assembly instructions. Radlall J Visit www.radiaii.com and enter the part number.

STRAIGHT PLUGS CRIMP TYPE FOR FLEXIBLE CABLE Cable group STRAIGHT PLUGS SOLDER TYPE FOR SEMI-RIGID CABLE Cable group RIGHT ANGLE PLUGS CRIMP TYPE FOR FLEXIBLE CABLE Cable group Standard packaging = unit AH dimensions are given in mm (inch) Go online for data sheets & assembly instructions. Radiall J Visit www.radiall.com and enter the part number.

STRAIGHT JACK SOLDER TYPE FOR SEMI-RIGID CABLE STRAIGHT SQUARE FLANGE JACK CRIMP TYPE FOR FLEXIBLE CABLE Cable group STRAIGHT SQUARE FLANGE JACKS SOLDER TYPE FOR SEMI-RIGID CABLE Cable group Go online for data sheets & assembly instructions. Radlall J Visit www.radiall.com and enter the part number.

STRAIGHT BULKHEAD JACK PANEL SEALED Cable group SQUARE FLANGE STRAIGHT FEMALE RECEPTACLE (extended dielectric) Part number Go online for data sheets & assembly instructions. Radiall'X* Visit www.radiall.com and enter the part number.

Adapters and Caps IN SERIES ADAPTERS TNC 18 GHz Part number Fig. Captive center contact Panel drilling Note Part number Note R143 850 700 Male short circuit Go online for data sheets & assembly instructions. Radiall Visit www.radiall.com and enter the part number.

Introduction SMA 2.9 series is compatible with K® series, 2.92 mm, SMA and SMA 3.5 series, and has a shortened male center contact, ensuring a non destructive mating. Radiall offers four product variations for SMA 2.9 to meet all your needs with two different designs. The standard design is using our “ULTEM” insulator technology and is qualified up to 40 GHz. The high frequency design is using our “KAPTON” insulator technology and is qualified up to 46 GHz. All versions feature the same electrical high performance and are available in a variety of configurations. SMA 2.9 FOR GENERAL USE,...

Go online for data sheets & assembly instructions. Radlall J Visit www.radiall.com and enter the part number.

Test / Characteristics Values / Remarks ULTEM technology KAPTON technology ELECTRICAL CHARACTERISTICS MECHANICAL CHARACTERISTICS Packaging: unit AH dimensions are given in mm (inch). STRAIGHT PLUGS, SOLDER TYPE FOR MICROPOROUS SEMI-RIGID CABLES Cable group Go online Jor data sheets & assembly instructions. Radiall'X# Visit www.radiall.com and enter the part number.

Jacks and Receptacles STRAIGHT JACK SOLDER TYPE FOR MICROPOROUS SEMI-RIGID CABLES Part number Dimension A (mm) Captive center contact Frequency range UNIVERSAL SCREW-ON FEMALE RECEPTACLES Part number FLANGE FEMALE RECEPTACLES Part number Go online for data sheets & assembly instructions. Radiall X* Visit www.radiall.com and enter the part number.

SMA 2.9 Glass Bead and In Series Adapters GLASS BEAD Part number Part number Fig. Insulator Note Frequency range Go online for data sheets & assembly instructions. Radiall X* Visit www.radiall.com and enter the part number.