*myaeroexpo

Catalogs
RADIALL
4.1-9.5/4.3-10/QLI/7-16

4.1-9.5/4.3-10/QLI/7-16

Product catalog summary

Introduction
Radiall's 7/16 series connectors are tailored for the telecommunications sector, emphasizing ease of use, reliability, and innovation. The series features a variety of connectors with enhanced designs and coupling nuts for improved manual tightening.

Composite 7/16 Connectors
These connectors are a lightweight and cost-effective alternative to traditional brass connectors, constructed from corrosion-resistant composite materials. They are UV resistant and ideal for harsh outdoor environments, offering significant weight reduction and performance benefits.

General Characteristics

Standard coaxial connectors with screw-on coupling
High power rating and excellent RF performance
Conforms to IEC 169-4, DIN 47223, and CECC 22 190 standards
Used in mobile communication infrastructure, radio links, and both indoor and outdoor settings

Electrical Characteristics

Impedance: 50Ω
Frequency range: DC - 7.5 GHz
Typical V.S.W.R.: 1.10 max from DC to 3 GHz, 1.20 max from 3 to 7.5 GHz
Intermodulation product (IMP3): -110 dBm typical
Insertion loss: MIL 0.05 √F (GHz)
High working voltage: > 2700 V

Mechanical Characteristics

Durability: 500 matings
Coupling torque: 35 Nm or less
Center contact retention force: > 200 N

Environmental Characteristics

Temperature range: -40°C to +85°C
Humidity: Up to 100% at 20°C
Flammability rating: UL94-VO
Waterproof: IP67

Materials and Platings

Bodies: Brass with Silver + BBR plating
Center contact: Brass or Beryllium copper with Silver plating
Insulator: PTFE
Gasket: Silicon rubber

Custom Models
Radiall provides custom connector designs based on the 7/16 series standard to meet specific customer needs.

Intermodulation
Intermodulation (IM) is an unwanted modulation causing distortion in high-frequency carriers. Radiall's intermodulation measurement system adheres to the IEC 46 D/292/NP standard proposal.

Overview
Radiall's QLI (Quick Lock Low Intermodulation) connectors are designed for high performance in challenging environments. They offer a compact, lightweight solution with a bayonet coupling system, suitable for both outdoor and indoor applications, providing performance akin to DIN 7/16 connectors but in a smaller, lighter form.

Specifications

Impedance: 50Ω
Frequency range: DC - 6 GHz
Very low intermodulation level: <-163dBc
VSWR: 1.04 + 0.02 √f
Power: Up to 1000 W @ 2 GHz
Temperature range: -55 °C to +120 °C
Moisture resistance: IP67

Mechanical Characteristics

Mechanical endurance: 100 cycles
Engagement force: ≤ 60N
Disengagement force: ≤ 50N
Mating mechanical retention force: 450 N min.

Materials and Plating

Connector bodies: Brass
Center contact: Silver
Outer contact: Brass with BBR plating
Insulators: PTFE

Applications

Telecom
Medical
Industrial
Indoor and outdoor use

Product Range
The document outlines various connector types including straight plugs, right angle plugs, straight jacks, and square flange jacks, each with specific dimensions and part numbers. Connectors are available in solder, crimp, and clamp types, suitable for flexible and semi-rigid cables.

Standards

IEC 61169
MIL PRF 39012

Conclusion
Radiall's connectors are engineered to meet high performance standards in demanding environments, providing reliable and efficient solutions for diverse applications.

Electrical Specifications

Frequency Range: 0 - 6 GHz
Typical VSWR: 1.02 + 0.02 F
Maximum Insertion Loss: 0.05 √F (GHz)
Insulation Resistance: 5000 MΩ min
Voltage Rating: <=1400 Veff
Dielectric Withstanding Voltage: <2500 Veff
Contact Resistance: < 1.5 mΩ
Power: 1KW @ 1 GHz
Intermodulation: -160 dBc

Mechanical Characteristics

Mechanical Endurance: 100 cycles
Disengagement Force: <12 N
Mating Torque: 1000 N.cm

Environmental Characteristics

Temperature Range: -55 °C ~ +155 °C
Sealing: IP67

Materials

Connector Bodies: Brass
Male Center Contact: Brass
Female Center Contact: Beryllium Copper / Bronze
Other Metallic Parts: Brass
Insulators: PTFE

Plating

Bodies: BBR2
Outer Contact: BBR2
Center Contact: Silver

Connector Types

Straight Plugs: Various part numbers with specific dimensions and finishes, including solder and clamp types.
Right Angle Plug: Specific part number with dimensions and finish.
Square Flange Straight Jack: Specific part number with dimensions and finish.

For detailed data sheets and assembly instructions, visit the Radiall website and enter the part number.

Catalog excerpts

Visit www.radiall.com for more information

Open the catalog to page 1

Contents 7/16 Introduction.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-4 to 13-5 Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Open the catalog to page 2

GENERAL • Standard coaxial connectors • Screw-on coupling • High power rating • Excellent RF performance APPLICABLE STANDARDS • IEC 169-4 • DIN 47223 • CECC 22 190 APPLICATIONS • obile communication infrastructure networks: M combiner, diplexer, filter... • Jumper and feeder cables assemblies • Radio links • Indoor and outdoor applications Radiall’s 7/16 series has been developed using the latest technology advances in connector design. These connectors are easy to use, highly reliable, innovative and are designed to meet the needs of the telecommunications market. The complete connector series...

Open the catalog to page 3

High performance range • Frequency range: DC - 7.5 GHz • types of coupling nut: 2 - Cross-knurled and 6 flats 27 mm wide coupling nut (3 000 N.cm) - flats coupling nut (32 mm wide), allowing high 6 coupling torque (3 500 N.cm) when used with a torque wrench • Intermodulation performance: 2 levels - 125 dBm cable assemblies - 110 dBm connectors and cable assemblies Radiall has developed its intermodulation measurement equipment following the IEC 46 D/292/NP standard proposal. It is aimed at third-order IMP measurements through the reflection method. The range of this test set-up is -132 dBm (-175...

Open the catalog to page 4

13-6 Go online for data sheets & assembly instructions. Radiall J Visit www.radiall.com and enter the part number.

Open the catalog to page 5

Test / Characteristics Standard reference Values / Remarks ELECTRICAL CHARACTERISTICS MECHANICAL CHARACTERISTICS Go online for data sheets & assembly instructions. Radlall J Visit www.radiaii.com and enter the part number.

Open the catalog to page 6

SIMPLIFICATION IS OUR INNOVATION Characteristics MATERIALS AND PLATINGS Go online for data sheets & assembly instructions. Radlall j" Visit www.radiall.com and enter the part number.

Open the catalog to page 7

Straight Plugs and Right Angle Plugs STRAIGHT PLUGS, FOR FLEXIBLE AND SEMI-RIGID CABLE RIGHT ANGLE PLUGS CRIMP AND CLAMP TYPE FOR FLEXIBLE CABLES Cable group Cable group dia. Part number Fig. ^pontoon^ Finish Note Go online for data sheets & assembly instructions. Radiall X* Visit www.radiall.com and enter the part number.

Open the catalog to page 8

7/16 Straight Jacks and Square Flange Jacks STRAIGHT JACKS Cable group Cable group dia. STRAIGHT SQUARE FLANGE JACKS Cable group Part number Fig. Go online for data sheets & assembly instructions. Radiall Visit www.radiall.com and enter the part number.

Open the catalog to page 9

Bulkhead Jacks and Receptacles STRAIGHT BULKHEAD JACKS FOR FLEXIBLE CABLES AND CORRUGATED CABLES STRAIGHT FLANGE FEMALE RECEPTACLES Part number Go online for data sheets & assembly instructions. Radlall J Visit www.radiall.com and enter the part number.

Open the catalog to page 10

7/16 In Series Adapters and Caps IN SERIES ADAPTERS Part number PROTECTIVE CAPS Part Number Note Go online for data sheets & assembly instructions. RadlallCf Visit www.radiall.com and enter the part number.

Open the catalog to page 11

Square Flange Jacks SQUARE FLANGE JACK RECEPTACLE SOLDER TYPE, PANEL SEAL Cable group SQUARE FLANGE JACK RECEPTACLE PANEL SEAL 7/16/COMPOSITE 7/16 Part number Fig. Captive center contact Waterproof interface Color Panel drilling Available packaged in increments of 20 units Processed according to customer needs * O-ring inside, only on the waterproof models Go online for data sheets & assembly instructions. Radiall J Visit www.radiall.com and enter the part number.

Open the catalog to page 12

COMPOSITE 7/16 Panel Drilling P01 Go online for data sheets & assembly instructions. Radlall£f Visit www.radiall.com and enter the part number.

Open the catalog to page 13

QLI Overview Radiall has expanded its broad range of Quick Lock products with QLI (Quick Lock Low Intermodulation). With the QLI, Radiall introduces a new solution for harsh environments, where performance and safety are critical. QLI connectors are designed to provide performance similar to DIN 7/16 with a very low intermodulation level, and a quick and safe connection, without any tools. Compared to 7/16, QLI is cheaper but also smaller (-31%) and lighter (-62%) offering an easy to use concept with its bayonet coupling system. QLI is double sealing and offers special anti-corrosion & watertight...

Open the catalog to page 14

Test / Characteristics Values / Remarks ELECTRICAL CHARACTERISTICS MECHANICAL CHARACTERISTICS Go online for data sheets & assembly instructions. Radlall j" Visit www.radiaii.com and enter the part number.

Open the catalog to page 15

Plugs and Jacks ■ STRAIGHT PLUGS RIGHT ANGLE PLUGS __B Cable group dia. Part number STRAIGHT JACK Cable group dia. Part number Radiall J Visit www.radiall.com and enter the part number. 13-17

Open the catalog to page 16

BULKHEAD STRAIGHT JACK Cable group Captive center contact Finish Packaging SQUARE FLANGE STRAIGHT JACK Cable group Part number Go online for data sheets & assembly instructions. Radlall J Visit www.radiall.com and enter the part number.

Open the catalog to page 17

GENERAL • Low Intermodulation connector • Screw-on & Push-pull coupling mechanism • High power rating • 30% smaller & 60% lighter than 7/16 APPLICABLE STANDARDS • IEC 61169 • MIL PRF 39012 APPLICATIONS • Telecom • Medical • Industrial • Indoor and outdoor use 4.3-10 Designed for major telecom equipment manufacturers, the 4.3-10 series offers a small, lightweight solution for outdoor telecom applications where high performance is essential and low intermodulation is required. Radiall's broad product portfolio includes the 4.3-10, 4.1-9.5, 7/16 and the innovative QLI (Quick Lock Low Intermodulation)...

Open the catalog to page 18

4.1-9.5/4.3-10/QLI/7-16

4.1-9.5/4.3-10/QLI/7-16

Catalog excerpts

All RADIALL catalogs and technical brochures

Archived catalogs