B+ Products
38Pages

CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 1.8 to 5.0Vdc - 15kHz to 250MHz Q-TECH CORPORATION Features • Made in the USA - ECCN: EAR99 • DFARS 252-225-7014 Compliant Electronic Component Exemption • Broad frequency range from 15kHz to 250MHz (for higher frequencies please consult the factory) • Rugged 4-point mount (SMD ceramic) or 3 point mount (others) shock resistant • Small packages and footprints offering 5x7mm SMT and leaded with 4-point crystal mount • 100kRad (Si) tolerant • ACMOS, LVCMOS, TTL, LVDS, LVPECL • Tristate Output option (-D) except for LVDS and LVPECL (standard) • Hermetically sealed package • Fundamental and 3rd Overtone design • Swept Quartz Crystal or Cultured Quartz Crystal • Low phase noise and jitter • Q-Tech does not use pure lead or pure tin in its products • Custom screening and QCI available with MCM part number • MIL-PRF-55310/9, /16, /21, /26, /27, /28, /30, /33, /34, /35, /36, /37, /38, /39, /40 equivalent Ordering Information (Sample part number) Lead Finish: T = Standard (*) S = Solder Dip (**) Output Frequency Materials Level 1 = 100kRad Tolerant Die, Swept Quartz Crystal 2 = 100kRad Tolerant Die, Cultured Quartz Crystal 3 = Class B Die, Swept Quartz Crystal Package: See Pages 5-7, 29-32 Logic & Supply Voltage: = = = = = = ACMOS (****) HCMOS TTL LVCMOS LVCMOS LVCMOS Frequency vs. Temperature Code (***): ± 65ppm at -55ºC to +125ºC ± 50ppm at -55ºC to +105ºC ± 75ppm at -55ºC to +125ºC ± 50ppm at -55ºC to +125ºC (***) ± 100ppm at -55ºC to +125ºC ± 50ppm at -40ºC to +85ºC ± 100ppm at -40ºC to +85ºC ± 100ppm at -55ºC to +105ºC ± 15ppm at 23ºC ± 1ºC (***) 19 = ± 50ppm at -55ºC to +125ºC reference to F at 23ºC 2 6 7 9 10 11 12 16 LVDS LVDS LVPECL LVPECL Screening Option: Per MIL-PRF-38534, Class K (modified) Per MIL-PRF-55310, Level S Per MIL-PRF-55310, Level S (modified) Per MIL-PRF-55310, Level B (modified) Per NASA EEE-INST-002, Level 1 Engineering Model Note: If breadboard model is desired, refer to normal QT products or consult with Q-Tech. Gold Plated: 50μ ~ 80μ inches typ. Hot Solder Dip Sn60/Pb40 per MIL-PRF 55310 is optional for an additional cost See Note (*****) Frequency stability vs. temperature codes may not be available in all frequencies. For 5x7mm products, Code 19 is only available for ≤32MHz and Code 9 is only Blank = No Tristate available for ≤100MHz. D = Tristate (****) HCMOS & TTL compatible (*****) (D) code for tristate is not required for LW, NW, LP and NP logic types. This enable/disable function is included by default. For Non-Standard requirements, contact Q-Tech Corporation at Sales@Q-Tech.com Tristate Option: Q-TECH Corporation - 6161 Chip Avenue, Cypress, CA 90630 - Tel: 310-836-7900 - Fax: 310-730

CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 1.8 to 5.0Vdc - 15kHz to 250MHz Q-TECH CORPORATION Scope. This specification establishes the general quality and reliability requirements for a family of hybrid, hermetically sealed square wave, B+ crystal oscillators. Part Number. The part number shall be as specified in the detail specification. APPLICABLE DOCUMENTS Specifications and Standards. Unless otherwise specified, the following documents shall be applicable to this specification to the extent specified herein. SPECIFICATIONS MIL-PRF-55310 Crystal Oscillators,...

CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 1.8 to 5.0Vdc - 15kHz to 250MHz Q-TECH CORPORATION GENERAL SPECIFICATION (Cont’d) 3.5.1 Construction Technology. The device shall be constructed as a class 2-Type 1 hybrid oscillator of MIL-PRF-55310. Workmanship. The device workmanship shall meet the requirements of MIL-PRF-55310. Element Derating. All active and passive elements shall be derated in accordance with the applicable hybrid microcircuit element requirements of MIL-STD-975. Elements shall not operate in excess of derated values. Active Elements. The active...

CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 1.8 to 5.0Vdc - 15kHz to 250MHz Q-TECH CORPORATION GENERAL SPECIFICATION (Cont’d) 4.2 Screening. Hybrid crystal oscillators shall have been subjected to and successfully passed all the screening tests as applicable in Tables I, II, III, IV, V, VI. Nondestructive Bondpull. 100% Non-destructive bondpull applicable to screening S, A, C, N. Percent Defective Allowable (PDA). The percent defective allowable shall be 2% (Screening Option S, A, C) or 5% (Screening Option N) 10% (Screening Option B) or one device, whichever is...

CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 1.8 to 5.0Vdc - 15kHz to 250MHz Q-TECH CORPORATION CLASS B+ PRODUCT OFFERINGS Output Frequency Package Vdd (V) Logic Range CMOS TTL LVDS LVPECL Flat Pack (FP) 16 Pin Formed Lead CMOS TTL LVDS LVPECL CMOS TTL LVDS LVPECL Flat Pack (FP) 20 Pin Formed Lead CMOS TTL LVDS LVPECL Flat Pack (FP) 14 Pin Formed Lead CMOS TTL LVDS LVPECL Notes: 1. LVDS and LVPECL are only available in 2.5V and 3.3V. 2. TTL is only available in 5.0V. 3. Not all frequencies ranges listed are available for all logic types. See Pages 20 - 24 for...

CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 1.8 to 5.0Vdc - 15kHz to 250MHz Q-TECH CORPORATION CLASS B+ PRODUCT OFFERINGS Output Frequency Package Vdd (V) Logic Range Surface Mount (SMD) 4 Pin J-Lead Surface Mount (SMD) 4 Pin J-Lead Surface Mount (SMD) 4 Pin Gull Wing Surface Mount (SMD) 4 Pin Formed Lead Surface Mount (SMD) 6 Pin Formed Lead CMOS TTL LVDS LVPECL Surface Mount (SMD) 6 Pin Gull Wing CMOS TTL LVDS LVPECL Notes: 1. LVDS and LVPECL are only available in 2.5V and 3.3V. 2. TTL is only available in 5.0V. 3. Not all frequencies ranges listed are available...

CLASS B+ PRODUCTS HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS 1.8 to 5.0Vdc - 15kHz to 250MHz Q-TECH CORPORATION CLASS B+ PRODUCT OFFERINGS Output Frequency Package Vdd (V) Logic Range 5x7mm Surface Mount (SMD) 4 Pads 5x7mm Surface Mount (SMD) 4 Pin Formed Lead 5x7mm Surface Mount (SMD) 4 Pin Gull Wing 5x7mm Surface Mount (SMD) 6 Pads CMOS LVDS LVPECL CMOS LVDS LVPECL 5x7mm Surface Mount (SMD) 6 Pin Formed Lead CMOS LVDS LVPECL 5x7mm Surface Mount (SMD) 6 Pin Gull Wing CMOS LVDS LVPECL Notes: 1. LVDS and LVPECL are only available in 2.5V and 3.3V. 2. TTL is only available in 5.0V. 3....