LAVATORY SERVICE VEHICLE WTJ5050GWS

Product catalog summary

Introduction
The WTJ5050GWS Lavatory Truck is designed for emptying and refilling lavatories onboard aircraft.

Standards
The truck complies with several standards including IATA AHM 910, 913, 915, MH/T6015-1999, and GB7258-1997, ensuring safety and operational efficiency.

Features and Specifications
The truck features a Qingling Vehicle chassis, waste and clean water systems, hydraulic and electrical systems. It includes a 4KH1-TC engine, Euro III emission standards, and specific dimensions and capacities for water tanks and platform.

Water Tank
Separate clean and waste water tanks made of stainless steel with features for efficient drainage and vibration absorption. The waste tank includes a cleaning pipeline and the clean tank has filters and a level indicator.

Water Pump
Stainless steel centrifugal pump driven by a hydraulic motor, with options for temperature control via engine exhaust. Includes a safety valve and pressure gauge.

Pipeline
Stainless steel and food-grade hoses with quick coupling connectors for clean water, and a waste water receiving system with storage for hoses.

Elevating Working Platform
Features an anti-skid aluminum chequer plate, emergency controls, and warning lamps. Powered by PTO control.

Hydraulic System
Includes PTO, control devices, and a comprehensive hydraulic setup for water supply operations.

Electrical System
Comprises batteries, control panel, and lamps for night operations, with emergency switches for safety.

Emergency Device
Emergency switch in the driver's cabin to stop the engine if needed.

Accessories and Tools
Includes a list of tools and documents provided with the truck, such as spanners, pliers, screwdrivers, and various certificates and manuals.

Catalog excerpts

POWER FORCE TECHNOLOGIES PTE LTD Model WTJ5050GWS Lavatory Truck Model WTJ5050GWS Lavatory Truck for empty and refill lavatories onboard aircraft 2. Standards IATA AHM 910 IATA AHM 913 IATA AHM 915 MH/T6015-1999 GB7258-1997 Basic Requirements for Aircraft Ground Support Equipment Basic Safety Requirements for Aircraft Ground Support Equipment Standards Controls Aircraft Lavatory Truck Safety Specifications for Motor Vehicles Operating on Roads Features and Specification a. Lavatory Truck consists of Qingling Vehicle chassis, waste water system, clean water system, hydraulic system, elevating system and electrical system. 53 TUAS VIEW PLACE, LINK POINT PLACE SINGAPORE 637889 TEL (065) 6316 2275 & 6316 2270 FAX (065) 6316 2264 E-MAIL : [email protected] Website : http://www.powerforce.com.sg

Open the catalog to page 1

POWER FORCE TECHNOLOGIES PTE LTD b. Vehicle Chassis under Qingling model NKR77PLPACJAY with engine model of 4KH1-TC. All tires under 7.00-15-10PR, rear axle is twin wheel design. Driver’s cabin comes with air-conditioner. c. Model WTJ5050GWS Lavatory Truck meets GB7258-1997 standards (Safety Specifications for Motor Vehicles Operating on Roads). Water tanks and accessories are mounted to the vehicle chassis using bolts and nuts. d. Besides the driver’s cabin, when platform at its lowest position, the water tank height is lower than 1350mm. 53 TUAS VIEW PLACE, LINK POINT PLACE SINGAPORE 637889...

Open the catalog to page 2

POWER FORCE TECHNOLOGIES PTE LTD Water Tank a. Clean water tank and waste water tank are independence t each to each other. Tank material using 3mm thick 1Cr18Ni9Ti Stainless Steel, with TIG welding method to ensure all weldments is smooth and neat. Tanks are installed at tilted angle to facilitate drainage. Water tanks interior are installed with 2mm thick stainless steel form plate for absorbing the water turbulences when vehicle is moving. Tank top installed with air vent valve. The water tanks are mounted to the chassis with rubber mount to absorb the vibration during driving. b. Features...

Open the catalog to page 3

POWER FORCE TECHNOLOGIES PTE LTD outlet point incorporated with quick coupling connector to facilitate quick coupling to aircraft inlet point. b. Waste water receiving system, incorporated with waste water receiving hose at the end of the waste water tank. c. Waste water tank inlet fitted with aluminum coupling. Vehicle rear incorporated with a storage box for waste water hose. 7. Elevating Working Platform Elevating working platform fitted at vehicle rear, customer can have selection of using fork or sleeve design for the elevating system. Platform length between 1000 – 1200mm, width between...

Open the catalog to page 4

POWER FORCE TECHNOLOGIES PTE LTD 11. WTJ5050GWS Lavatory Truck Accessories and Tools List (supplied with the truck) 53 TUAS VIEW PLACE, LINK POINT PLACE SINGAPORE 637889 TEL (065) 6316 2275 & 6316 2270 FAX (065) 6316 2264 E-MAIL : [email protected] Website : http://www.powerforce.com.sg

Open the catalog to page 5

All POWER FORCE TECHNOLOGIES PTE LTD catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list