POINT OBSTRUCTION LIGHTING POC STANDARD CONTROLLERS INCANDESCENT LIGHTING Compliance with FAA Advisory Circular 70/7460-1 & ICAO Annex 14 The POC controller provides the control and monitoring functions for an incandescent red obstruction lighting system. During the night, this lighting system warns pilots to stay clear of the obstruction to air navigation when installed in accordance with FAA AC 70/7460-1 and applicable FCC and ICAO rules and recommendations. Together with FAA L-864 PFB flashing red beacons and POL red obstruction lights, the POC is the key to an integrated red obstruction lighting system. One PPC FAA photoelectric controller (included) provides automatic lighting activation at dusk. The FAA requires by law that the owner of a tall structure install a lighting system when it is determined by regulation or study that the structure presents an obstruction to air navigation. The owner is required to monitor the system for failures on a continuing basis. See file OL341SPC for complete specifications. STANDARD CONTROLLER FOR ONE (1) PFB BEACON POC-60101-1 FAA Photoelectric Controller not shown The standard UL listed POC enclosure is rated NEMA 4X fiberglass reinforced polyester in gray (RAL 7036) with stainless steel piano hinged door and seamless gasket. The door is to be secured by two captive screws. All components are panel mounted and pre-wired to IEC listed terminal blocks. The high quality enclosure is certified to IEC 529, CSA, KEMA and UL 508A Type 4X & 12, IP66 watertight and dust tight. OL-3.3.0 June, 2015

POINT OBSTRUCTION LIGHTING POC STANDARD CONTROLLERS CONTROLLER SELECTION CHART Catalog Number Override Switch POL’s are not alarmed; there is one load output for an undetermined number of side lights. Water Tower version; for one double with FAA required functions. ALARM LIGHT There shall be one door mounted red 30mm pilot light indicating alarm status. SYSTEM ON LIGHT There shall be one door mounted amber (yellow) 30mm pilot light indicating that the unit is activated and power is available to the loads. SURGE SUPPRESSOR The POC and lighting circuits shall be protected from transient voltage...