PHOENIX CMPPS 96/150 MOBILE PASSENGER STAIR

Product catalog summary

Overview: The Phoenix CMPPS96/150 is a robust, chassis-mounted passenger stair designed for airport ramp operations. It features a heavy-duty formed chassis and a parallelogram stair design made of structural aluminum, suitable for aircraft with doorsills between 96” and 150”.

Chassis and Suspension: The chassis is constructed from heavy-duty sheet metal with 3/8 steel plate at the front and rear. It includes solid mount front and rear suspension.

Axles: The drive axle is a Dana 60 limited slip with a 7.17:1 ratio, and the steer axle is also a Dana 60.

Features: Key features include four-corner stabilizers, stainless steel hydraulic and fuel tanks, manual lift and stabilizer controls, safety features for engine coolant and low oil pressure, handbrake/neutral safety, rub rails, rounded chassis corners, instrument gauges, a fuel level gauge in the cab, and an electrical system with components in one location. The unit also has a roto cast seat with adjustable back support, replaceable chassis side panels, and turn signals.

Engine and Transmission: The stair can be equipped with either a Perkins 1104C.44 4-cylinder diesel engine or a Deutz Diesel F4M2011 3.1L 4-cylinder oil-cooled engine. It uses a Ford Industrial C6 diesel 3-speed transmission.

Electrical System: The system operates on a 12-volt negative ground with a 60 amp alternator.

Steering and Brakes: The steering is hydrostatic with an orbitrol/cylinder system. The brakes are a dual split system with hydraulic assist, featuring front disc and rear drum brakes.

Hydraulic System: The hydraulic system is engine-driven with positive displacement and includes an emergency pump.

Shipping Dimensions: The stair measures 270.00” in length, 83.00” in width, 132.00” in height, and weighs 6700 lbs.

Performance: The stair tread width is 48”, with a platform width of 48” x 60” deep. The stair height ranges from 96” to 150”, and the maximum speed is 20 mph.

Catalog excerpts

PHOENIX CMPPS 96/150 MOBILE PASSENGER STAIR-1

PHOENIX METAL PRODUCTS, INC. The Phoenix CMPPS96/150 is a chassis mounted, passenger, parallelogram stair. It is designed for the rugged nature of airport ramp operation. The chassis is a heavy duty formed chassis. The stair is a parallelogram design and is made of structural aluminum.. The drive line consists of a heavy duty front and rear axles and can be outfitted with different engines.. The stair is stabilized at all four corners and has adjustable sliding wings at the platform. The stair will service aircraft with doorsill between 96” and 150”. The stair has lighting for night service. The stair is supported by two lifting cylinders with hydraulic locking valves. The unit comes standard with: electrical emergency pump, instrument gauges and non-skid decking

Open the catalog to page 1

PHOENIX CMPPS 96/150 MOBILE PASSENGER STAIR-2

SPECIFICATIONS / \ CHASSIS: HEAVY DUTY SHEET METAL WITH 3/8 STEEL PLATE FRONT AND REAR SUSPENSION: SOLID MOUNT FRONT AND REAR STEERING: HYDROSTATIC- ORBITROL/ CYLINDER AXLES: DRIVE AXLE - DANA 60 LIMITED SLIP - 7.17:1 RATIO STEER AXLE - DANA 60 BRAKES: DUAL SPLIT SYSTEM - HYDRAULIC ASSIST FRONT DISC - REAR DRUM ELECTRICAL SYSTEM: 12 VOLT - NEGATIVE GROUND 60 AMP ALTERNATOR HYDRAULIC SYSTEM: ENGINE DRIVEN - POSITIVE DISPLACEMENT EMERGENCY PUMP TRANSMISSION: FORD INDUSTRIAL C6 DIESEL - 3 SPEED FEATURES: 4 CORNER STABILIZERS STAINLESS STEEL HYDRAULIC AND FUEL TANK MANUAL LIFT AND STABILIZER CONTROLS: ENGINE...

Open the catalog to page 2

All Phoenix Metal Products Inc. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list