RECON-XT The RECON-XT is the ultimate value, entry-level system for the DJI Matrice 300. A strong fit for smaller scan areas and teams on a budget. The RECON-XT is designed to grow and adapt with your business. Flexibility in mounting options is a key benefit of this Phoenix system. The RECON-XT is designed to fly on the DJI M300, and can also be adapted for vehicle and backpack configurations. FEATURES » Ultralight LiDAR payload, designed for the DJI M300 BACKPACK »BACKPACK Mounting: Mount on a drone, vehicle, or even backpack Flexible » Multi-Target Capacity—up to 2 target echoes per laser shot » Fast and accurate measurement 640k shots/s, up to 1.28M points/s QUICK SPECS Absolute Accuracy 1.7 cm RMSE @ 80 m Range OVERALL DIMENSIONS PAYLOAD WEIGHT CAMERA RESOLUTION EXTERNAL STORAGE OPERATING TEMPERATURE Scan Rate 5/10/20 Hz, up to 2 returns Max DJI M300 Flight time 33 Minutes LiDAR SENSOR LASER PROPERTIES MULTIPLE ECHOES BEAM DIVERGENCE H x V UTILITIES MAPPING 640k points/s, up to 1.28M points/s dual return mode 10 mm (Average within 0.5 ~ 70 m @ 50% reflectivity) SCAN RATE LASER BEAM FOOTPRINT H x V CONSTRUCTION SITE SURVEYING AGRICULTURE & FORESTRY MONITORING OPEN PIT MINING OPERATIONS STOCKPILE VOLUMETRICS GENERAL MAPPING NAVIGATION SYSTEM CONSTELLATION SUPPORT GPS+GLONASS+BEIDOU +GALILEO SUPPORT ALIGNMENT Kinematic, Dual-Antenna (optional) OPERATION MODES Post-processing only POSITION ACCURACY ATTITUDE ACCURACY

POINT DENSITY RECON-XT Swath Width Covered Area: 20% Flightline Overlap (ha/ac) Covered Area: 50% Flightline Overlap (ha/ac) Swath Width 1) Flight Altitude Above Ground Level (AGL) 2) Assuming 30 min flight time 3) Average Point Density calculated based on 80% reflectivity 4) ± 45° field of view EXPLORE A PHOENIX LiDAR SYSTEM FOR YOUR TEAM, CONTACT US! PhoenixLiDAR.com | [email protected] | USA +1.323.577.3366 Copyright ©2021 Phoenix LiDAR Systems. Specifications are subject to change without notice. Other trademarks or registered trademarks are property of their respective owners.