ANALYTICAL BALANCEPCE-ABT 220L » Wind protection for stable weighing » RS232 interface for PC connection » Backlight » Resolution of 0.1 mg » Weighing surface of 80 mm » Weighing range up to 220 g » Level for aligning the analytical balance » Calibration weight included in delivery With a resolution of 0.1 mg, this analytical balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the fine scale. Typical areas of application for the analytical balance are therefore in laboratories or in research facilities. Weighing the smallest samples is very difficult because even a small gust of wind falsifies the measured value. For this reason, a wind shield is installed around the weighing surface of the analytical balance. This ensures that even the smallest gusts of wind have no effect on the measurement of the precision scale. The analytical balance can be connected directly to a PC via the RS232 interface. With the optionally available software for the analytical balance, the measurement data can be presented in a table. A graphic representation of the measured values UE]from the analytical balance is also possible with the software. There is also the option of exporting the measured values Unrecorded by the analytical balance. In this way, the measured values UElof the analytical balance can be conveniently incorporated into presentations, sent by email or simply printed out. If necessary, the analytical balance can be checked with the calibration weight supplied. This ensures that the analytical balance delivers a perfect measurement result.

Weighing range Measuring range from 0 g General technical data Display size 5 Inch Tare range full measurement range Weighing plate material Stainless steel Menu language English, English (GB) Protection class (device) IP40 Connector type Cold-device plug Chester Rd, Old Trafford Suite 1N-B, Trafford House, M32 0RS Manchester Great Britain