USER MANUAL ANALYTICAL SCALE WITH TOUCHSCREEN ENGLISH User manuals in various languages (français, italiano, español, português, nederlands, türk, polski) can be found via our product search on: www.pce-instruments.co

Thank you for choosing the PCE-ABT 220 analytical balance. This user manual contains information on installation, accessories, troubleshooting, customer service, general maintenance, etc. It also describes various possible applications. Please read the user manual carefully before starting operation. If you have any questions about the balance, please contact us. PCE scales are ideal for weighing in laboratories and for general use. The scales can also be used for some advanced weighing functions. » Stainless steel weighing plate » LCD display with backlight » RS232 interface » Adapter included...

CALIBRATION OF THE SCALE Press the CAL button and the display will show: CAL XXX.XXXX, and the scale will begin internal calibration. You can also select manual calibration using a standard weight, and the instructions will guide you through the next steps. » Do not place the scale in a location where accuracy may be affected » Avoid extreme temperatures . Do not expose the device to direct sunlight or place it near an air conditioner » Avoid unsuitable tables . The table or floor must be firm and free of vibrations. » Avoid unstable power sources. Do not use the scale near devices with high...

» Place the scale on a firm, vibration-free surface. » Open the windshield and carefully insert the stainless steel weighing plate. » Level the scale using the adjustable feet and the spirit level. » Connect the scale to the power supply. » To improve performance, allow the scale to warm up for approx. 30 to 60 minutes and calibrate it before use. Once you have moved the scale into the correct position, level it using the adjustable feet and the spirit level. To do this, turn the adjustable feet on the back of the scale until the bubble in the spirit level is in the center.

SENSITIVITY CONFIGURATION - Low Sensitivity - Normal Sensitivity - Max. Sensitivity SPEED SETTING - Low speed - Normal speed - Higher speed CONFIGURATION OF THE WEIGHING UNIT In weighing mode, press “CONVERSION” to select the unit. There are 4 units to choose from: g/ct/oz/mg.

Piece counting function The scale has a piece counting function. Have products with the same weight and a minimum weight of >0.5 mg ready. 1 - Select the amount of sample to be placed on the weighing plate. 2 - Select the weight you want to weigh. The weight of the sample is displayed under “Sample weight”. Once the weight has stabilized, tap it again and the result will be displayed and saved. 3 - Tap here to obtain the total weight. Tap again to check. Carefully remove the scale from the packaging and lift it out of the box. The packaging contains everything you need to start weighing. 4 -...

Check the percentage weight function: 1 - Select 100% of the weight you want to place on the scale. 2 - Tap the value you want to weigh. The weight will be displayed. Once the weight has stabilized, tap it again. The result will be verified and saved. 3 - Tap here to weigh the total weight, then tap again to check the weight. 4 - The percentage will be displayed here. Works in the same way as the piece count function, except that you tap “Air weight” and “Weight in air” and then “Weigh in liquid,” and the result is shown on the display.

If problems arise, you can identify them and find a solution.

1200 yContinue y You can select the baud rate and type of communication according to the different printers or the connection to the PC. TRUST IN EVERY MEASUREMENT.

DISPOSAL For the disposal of batteries in the EU, the (EU) 2023/1542 directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose. In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or give them to a recycling company which disposes of the devices in line with law. For countries outside the EU, batteries and devices should be disposed of in accordance with your local waste regulations. If you have any questions,...