*myaeroexpo

SCANDAL

Product catalog summary

Parts Catalogue Overview:
This document is a parts catalogue for the SCANDAL model by Cyclone Airsports Ltd, trading as Pegasus Aviation. It provides detailed listings of components required for various assemblies of the aircraft, including part numbers, descriptions, and quantities.

Keel Assembly:
The keel assembly section lists components such as nyloc nuts, hex bolts, washers, plastic saddles, and keel tubes. Key parts include the king post channel, nose hand loop, and nose plate. Different keel tube sizes are available (12.4, 13.6, and 14.4).

Leading Edge Assembly:
This section includes parts like tip turn adjusters, screws, pop rivets, jam cleats, and nyloc nuts. It details the leading edge inner and outer components, with variations for different sizes (12.4, 13.6, and 14.4). The leading edge channel and complete assemblies for both left and right hands are also specified.

Cross Tube Assembly:
Components listed include hex bolts, skiffy caps and rings, nylon washers, and spacers. The cross tube assembly is available in different sizes for left and right hands. Additional parts include a cross spar pivot channel, VB pulley, and various bushings and bearings.

Control Frame Assembly:
This section covers parts such as control frame castings, base bar knuckles, pulleys, bush bearings, and rigging components. It includes detailed listings for lower side, front, and rear rigging, as well as uprights for different sizes. Additional components include speed bar and cable, knuckle pivot bearings, and various bolts and nuts.

King Post Assembly:
The king post assembly includes parts like the king post itself, available in different sizes, a king post foot, rivets, adhesive heat shrink, and stickers.

Final Assembly:
This section lists components for the final assembly, including skiffy rings, hex bolts, rigging components, main sails, nose cone, and sail mylar inserts. It also includes batten sets, eyelet spacers, and various nuts, bolts, and washers.

Conclusion:
The document provides a comprehensive list of parts required for assembling the SCANDAL model aircraft, with detailed specifications for each component. It is essential for ensuring the correct parts are used in the assembly process, contributing to the safety and performance of the aircraft.

Catalog excerpts

SCANDAL Parts Catalogue Cyclone Airsports Ltd trading as Pegasus Aviation Elm Tree Park, Manton, Marlborough, Wiltshire. UK Telephone +44 (0) 1672 861578 Fax +44 (0) 1672 861550 www.pegasusaviation.co.uk email - [email protected]

Open the catalog to page 1

1/4M T-type nyloc nut M6 x 60 mm hex bolt 1/4” T4LP washer 1/4” T3LP washer 1 7/8- M8 plastic saddle King post channel Nose hand loop 12.4 Keel tube 13.6 Keel tube 14.4 Keel tube Nose plate 1/4 x 1/16 steel clevis pin Nose catch channel 5/8 safety ring 1/4 ” UNF x 30mm hex bolt 22 mm push pin 2 1/8 x M8 plastic saddle M6 T-type nyloc nut 6 mm raised skiffy cap 6 mm skiffy ring M6 3 5 mm hex bolt King post channel pulley

Open the catalog to page 2

Scandal Leading Edge Assembly

Open the catalog to page 5

Cross Tube Assembly Part Number Description Qty 12.4 Cross tube (left hand) 1 13.6 Cross tube (left hand) 1 14.4 Cross tube (left hand) 1 12.4 Cross tube (right hand) 1 13.6 Cross tube (right hand) 1 14.4 Cross tube (right hand) 1 Cross spar pivot channel 2 Eyelet nickel spur 1 3 mm hibrite nylon cord 1 Half round spacer 2 Brass sheave pulley 1 Cross spar boot 1 Cable tie (black small) 1 Anti float webbing 1

Open the catalog to page 6

LEF-T ■s.iQg bottom K^cCXf jq -

Open the catalog to page 10

Item Part Number 1 YSC-6100 King Post Assembly Description 12.4 King post 13.6 King post 14.4 King post King post foot 3/16 dia x 3/8 rivet Adhesive heat shrink King post sticker

Open the catalog to page 12