Parts Catalogue Overview
This document is a parts catalogue for the Q2 Wing, provided by Cyclone Airsports Ltd, trading as Pegasus Aviation. It includes detailed listings of components required for the assembly of various sections of the wing.
Contents
- Leading Edge
- Cross Spar
- Control Frame
- Fin Tube
- Keel Tube
- Final Assembly
Leading Edge
This section lists components such as tip adjust placards, hex bolts, socket cap screws, nylock nuts, plastic saddles, and various sections of the leading edge including front and rear sections for both left and right sides. Key components include washout tubes, shock cords, and end plugs.
Cross Spar
Components listed include the cross spar itself, ball seats, pivot blocks, restraint cables, and various nuts and washers. The section details the assembly of the cross spar with specific parts like the cross spar centre ball and anti-float webbing.
Control Frame
This section includes parts for the control frame such as side tubes, base tubes, knuckles, rigging cables, and trim cable assemblies. It also lists various bolts, nuts, washers, and other small components necessary for the assembly of the control frame.
Fin Tube
Components for the fin tube include the fin tube itself, dome bolts, PVC tubes, roll pins, and pop rivets. The section also lists end plugs and washers required for the assembly.
Keel Tube
Parts listed include hex bolts, socket cap screws, eye bolts, screws, nylock nuts, washers, and various plastic saddles. The keel tube section also includes components like the keel protecting sleeve and shock cords.
Final Assembly
This section covers the final assembly of the wing, listing components such as rigging cables, king post, reflex retention cables, upper and lower ribs, and various bolts, nuts, and washers. It also includes specific parts like the nose rib, tripple pulley block, and strip shackles.
Conclusion
The document provides a comprehensive list of parts required for the assembly of the Q2 Wing, detailing each component's part number and quantity needed. This structured catalogue is essential for ensuring all necessary components are available for the assembly process.