Data Recorder
8Pages

OROS Recorder DATASHEET Data Recorder With OROS 3-Series Analyzers Introduction Acquiring actual and valuable data in the field is the root of your noise and vibration measurement job. The data must be collected and secured in one pass whatever the environment. The OROS 3-Series instruments feature native real-time multi-analysis capabilities allowing complete throughput of raw data managed by the Recorder module. It is a multi-channel and multifrequency digital recorder that operates simultaneous with other analysis or stand-alone. The recorder comes as a standard part of ® NVGate , the 3-Series analyzers software platform. Combined with the player, it is the cornerstone of any record/post-analysis and acquisition backup measurement type. The wide range of inputs types from the latest OROS 3-Series analyzers is available for your records: CAN, DC, tachometers, strain, temperature. All are conditioned in a rugged and portable package. OROS recorder/analyzers units Vehicles, vehicle parts Ship, air craft structure Industrial machineries Helicopter structure Backup of real-time analysis Transient and unpredictable shock, noise or vibration capture Predictive/preventive maintenance data acquisition on industrial sites. Vehicles, ships, aircraft prototyping and qualification tests Raw data acquisition with monitoring Diagnostic of machinery failures

OROS Recorder DATASHEET

OROS Recorder DATASHEET Figure 1: Multiple sampling frequencies Backup or controlled record The recorder can operate as a security backup of the raw signal data during acquisition and real-time analysis or as conventional recorder with advanced on-line, display, analysis and triggering tools. Backup: For critical measurements, both on-line analysis for monitoring and throughput to disk for data safety are necessary. The ORNV-REC plug-in enables to connect the active inputs to the recorder and to simultaneously analyze the signals through the NVGate Monitor or any other...

OROS Recorder DATASHEET Modes ORNV-REC provides multiple recording modes using the on-board hard disk capabilities (figure 3). Using Start to time triggering mode lets you specify the record duration. The signals are recorded for the specified duration after the start event. With the Start to stop mode, one event triggers the record and one event stops it. Time to stop mode provides an on-disk pre-trigger for catching unpredictable phenomenon. You can memorize up to 2 Gbytes of pre-trigger signals on the disk when you need to recover a default history for example. In addition to these...

OROS Recorder DATASHEET D-rec: direct recording The OROS D-rec is the stand-alone solution for a clear, simple and secured data recording with OR36, OR38 and Mobi-Pack instruments. With D-rec data recording has never been so easy. The presence of a PC with its complex and fragile interface is definitely not suited for the field conditions. With OROS D-rec no hassle while recording data in a harsh, crowded or disturbed environment. A readable control panel with large buttons features clear menus allowing the front-end and recorder setups. Acquisition Records raw time data without any PC Get...

OROS Recorder DATASHEET One instrument, 3 modes Of course the instrument is still an analyzer for real-time and off-line analyses. With its recorder capabilities, the analyzer covers any situation with the same instrument. Stand-alone digital recorder Real-time analyzer/recorder with PC Post-processing software license Accessories Xpod, plug and play signal conditioning The Xpod modules add signal conditioning to the OR36 and OR38 in a smart and field operation driven design. These 8 channel conditioners can be added, removed and exchanged between the analyzers in a few seconds. Moreover,...

OROS Recorder DATASHEET Sampling frequencies DC to 102.4 kS/s- 2 user defined sampling group - 10 to 15 S/s parameters - 6.4 MHz oversampled digital inputs (trig/tach/tors/samp) Operations Parallel throughput with real-time analyses - Backup or monitored Monitoring RMS level - RPM - Front-end signal (256 sample) - signal envelope on full duration Parallel analyses* Time view - spectra - Order spectra & profile - 1/n octave - RMS, Pk, DC profiles Modes Start to stop manual or triggered start and stop - Start to time fixed duration - Time to stop fixed duration before stop...

OROS Recorder DATASHEET About Us Now approaching 30-years in business, OROS' designs and manufacturing have been renowned for providing the best in noise and vibration analyzers as well as in specific application solutions. Our Philosophy Reliability and efficiency are our ambition everyday. We know you require the same for your measurement instruments: comprehensive solutions providing performance and assurance, designed to fit the challenges of your demanding world. Our Emphasis Continuously paying attention to your needs, OROS collaborates with a network of proven scientific affiliates...