PERISTOP
2Pages

Technical details a Stainless steel metalwork a Stainless steel PERISTOP® B-wire a Insulation by TEFZEL a 4kV dielectric strength : factory output a Net Junctions by BB splice connector a Junction boxes (for maintenance) a End of line boxes for testing ZUC40 Electronic The principle of the detection is based on the analysis of the electrical characteristics of an isolated current loop which is formed by the closing sensor PERISTOP® a Analysis of the current loop impedance a Analysis of the short-circuit a Analysis of the variation of leakage current The ZUC40 electronic board is could be mount in a standalone unit (2 or 4 zones), it can also be multi-rack mounted (up to 10 zones per rack). Warranty / Lifetime Net detector PERISTOP® is manufactured with PERISTOP® B-wire. It is a 304L stainless steel which allows a 10 years corrosion warranty in normal industrial environment. For use in highly corrosive environments (sea, severe chemical environment ...), the PERISTOP® B-wire can also be manufactured in stainless steel 316L. OREP has realised more than 200 km of working PERISTOP® all over the world over than 30 years. EX-PROOF Environment Stainless steel net with cut through detection system PERISTOP® fits on all types of fences, walls or buildings and all environments (salt, chemical, ex-proof areas...) Long life time and high reliability Ideal for high security or industrial sites All OREP’s detection systems use the same analysis technology. The electronics specially developed for security and outdoor applications has been designed to allow implementation of OREP perimeter detection equipment in EX-PROOF areas. Reliability: Very low false alarm rate Applications - References Performance: Very high level of detection Great durability: Metal parts in stainless steel High Voltage Power Stations - Nuclear Power Plants - Gas station Research Laboratories - LNG Terminals - Petrochemical Site Barracks - Detention Centre - Prisons - Site Oil Traitement - Refinery Detection cutting / climbing / attempted shunt www.celine-martin.com Adaptation to any type of configu

Configuration Description The PERISTOP® can be installed in two types of configuration: PERISTOP® is a 20 cm by 20 cm stainless steel mesh. The mesh is made to be a detector sensor net. All meshes are made with a 3mm stainless steel detection wire (OREP B-wire). a A local architecture with field electronic cabinet, consisting on ventilated thermostatically boxes witch control 2 or 4 zones, a A centralized architecture with a detection bay equipped by ZUC40 electronic board racks and PERIVISION software in option. Stainless s (Sensor net) Detection system All detection wires are mounted and...