VC30
4Pages

VC30 ELEVATED TAXIWAY EDGE LIGHT COMPLIANCES ICAO: Annex 14 - Volume I par. 5.3.18.8 APPLICATIONS Taxiway edge for ICAO, FAA and military taxiways BENEFITS • Only one lamp rated 30 or 45 W: its replacement is quick and easy without use of tools • 1000 hours lamp rated life at full intensity, but over 3000 hours in field operating conditions • Designed with simplicity allowing longer maintenance intervals and fewer spare parts • Lens gasket to avoid the use of sealing • No optical adjustment after lamp or lens replacement • Daymarker cone available on request PERFORMANCES • Lightweight and sturdy due to aluminium die-castings • Powder coating surface finishing to provide good corrosion resistance • Body balanced on the slipfitter for proper levelling by means of four screws • High jet blast resistance due to the small size of the fixture, 220 mm high • Protection degree: IP44 • Temperature range: -55°C to +55°C INSTALLATION • The fixture can be installed on pipe elbow or baseplate • Specific tools available for easy and precise installation (EnergyTechnology Via della Solidarieta, 2/1 40056 Valsamoggia Loc. Crespellano - Bologna (Italy) Tel: +39 051 66 56 611 - Fax: +39 051 66 56

www.ocem.com ocem@ocem.com

www.ocem.com ocem@ocem.com Basic P/N: Type of Light: T = Taxiway Pipe Elbow FAA L-867 Deep Base and Base Plate Colour: B = Blue Lamps: 30 = 1x30W 6.6A GZ 9.5 Base 45 = 1x45W 6.6A GZ 9.5 Base Options: C = Daymarker Cone S = 180°

www.ocem.com ocem@ocem.com REN EWAL PARTS FOR LIGHT UNIT 1 Lens 2 Gasket for lens 3 180° screen 4 Lamp 5 Lampholder 6 Body 7 Breakable coupling 8 Ring nut 9 FAA L-823 plug Refer to the relevant technical manual for the complete list of the available spare parts ACCESSORIES 013.0010 Set of two ryton rings for receptacle support inside pipe elbow 013.0008 Galvanized steel pipe elbow with upper threaded end only (2" - 11 GAS thread) 315.3210 Galvanized steel pipe elbow with both threaded ends (2" - 11 GAS thread) 315.1228 Base L-867, Class IA, Size B, 24" Deep 315.1062 Baseplate for...