LHP
LHP
- The LED heliport floodlight is designed with robust electronics that are highly resistant to shock and vibration.
- Constructed from lightweight aluminum die-castings with a powder-coated finish for enhanced corrosion resistance.
- Features a special optical design to reduce glare for pilots.
- Equipped with a frangible support to minimize hazards in case of impact.
- Operates on an extra low supply voltage of 48 VAC with a power factor of 0.89 and power consumption of 60 VA.
- Projector height is 250 mm with a protection degree of IP67 and a temperature range from -55°C to +55°C.
- Quick installation and aiming facilitated by the frangible support with slots.
- Complies with ICAO Annex 14 - Volume II standards.
- Designed for ICAO helipad surfaces.
- LEDs have a rated life of 60,000 hours at full intensity, extending to over 100,000 hours in field conditions.
- In new installations, LED lights reduce transformer size and life cycle costs.
- Special design ensures optimal and uniform horizontal illuminance with fewer projectors and reduced power consumption.
- Simple design allows for longer maintenance intervals and fewer spare parts.
- No optical adjustment needed after LED module replacement.
- Basic Part Number: LHP - 1 - 025 - 1P
- Mode: Parallel Circuit 48 VAC
- Mounting Assembly: Frangible Support, Height 250 mm
- Electrical System: Cable with FAA L-823 plug, 1 m long (default)
- Shipping Weight: 4.9 kg, Volume: 0.014 m³
- Electronic components, FAA L-823 plug, frangible support, LED modules with accessories for external and internal light beams.
- Transformer for parallel circuits 100W 230/48V
- Galvanized steel pipe elbows with threaded ends
- Set of ryton rings for receptacle support inside pipe elbow
- Threaded coupling for locking secondary plug-socket connection on pipe elbow
Catalog excerpts
LED HELIPORT FLOODLIGHT COMPLIANCES ICAO: Annex 14 - Volume II APPLICATIONS ICAO helipad surfaces BENEFITS • 60000 hours LED rated life at full intensity, but over 100000 hours in field operating conditions • In new installation, LED lights mean lower loads, lower size of transformers, thus low life cycle costs • Special design to obtain an optimum and uniform horizontal illuminance of the helipad with a limited quantity of projectors and reduced power consumption • Designed with simplicity allowing longer maintenance intervals and fewer spare parts • No optical adjustment after LED module replacement PERFORMANCES • The electronic is strong-built and highly resistant to shock and vibration • Lightweight and sturdy due to aluminium die-castings • Powder coating surface finishing to provide good corrosion resistance • Reduced glare to the pilot thanks to the special optical design • Frangible support to present the minimum hazard in case of impact • Extra low supply voltage: 48 VAC • Power factor: 0.89 • Power consumption: 60 VA • Protection degree: IP67 • Temperature range: -55°C to +55°C INSTALLATION • Quick installation and aiming through the frangible support provided with slots
Open the catalog to page 1
Basic P/N: ■ Mode: ■ 1 = Parallel Circuit 48 VAC Mounting Assembly:- 025 = Frangible Support H = 250 mm Electrical System: 1P = Cable with FAA L-823 plug , 1 m long (default) XX = Cable (specify the length in meters e.g. 01 = 1 m) RENEWAL PARTS FOR LIGHT UNIT 1 Electronic 2 FAA L-823 plug 3 Frangible support 4 LED module with accessories (external light beam) 5 LED module with accessories (internal light beam) Refer to the relevant technical manual for the complete list of the available spare parts ACCESSORIES 011.1525 Transformer for parallel circuits 100W 230/48V 013.0008 Galvanized...
Open the catalog to page 2
