OMNIDIRECTIONAL ELEVATED RUNWAY LOW INTENSITY APPROACH, THRESHOLD AND WING BAR, RUNWAY END, THRESHOLD/RUNWAY END, STOP WAY, TOUCHDOWN INDICATOR AND FILLETS LIGHT I COMPLIANCES ICAO: Annex 14 - Volume I and II Heliports, Fig.5-11 Ill.2 FAP-170: Runway Low Intensity lights APPLICATIONS Runway low intensity lights for approach, threshold and wing bar, threshold/runway end, runway end, stopway, touchdown indicator and fillets lights. BENEFITS • Single lamp offer a quick and easy replacement without need of tools. • 1500 hours lamp rated life at full intensity (500 h for 120W lamps), but over 3000 hours in field operating conditions. • Designed with simplicity allowing longer maintenance intervals and fewer spare parts. • Symmetric Fresnel clear lens, made of heat resistant glass fastened to the body by means of a stainless steel clamp. A silicon O-Ring between lens and body is provided for watertight with no use of any sealing for is quick and easy replacement. • No optical adjustment after lamp or lens replacement. • Unidirectional use with shielded lens. PERFORMANCES • Lightweight and sturdy due to aluminium die-castings • Powder coating surface finishing to provide good corrosion resistance • Body complete with a suitable coupling for direct mounting on breakable coupling or on the top of 60 mm dia supporting pole • Protection degree: IP54 • Temperature range: -55°C to +55°C INSTALLATION • The fixture can be installed on pipe elbow or baseplate. • OCEM ' a division of Energy Technology srl Via della Solidarieta 2/1 40056 Valsamoggia (Bologna) - Italy Ph: +39 051 66 56 611 - www.ocem.com

www.ocem.com [email protected] PHOTOMETRIC PERFORMANCES Fig. 1: FAP-170 6.1.5 Low Intensity Touchdown Indicator Fig. 3: FAP-170 6.1.6 Low Intensity Threshold and Wing Bar Fig. 2: FAP-170 6.1.2.3 Low Intensity Runway Approach Fig. 7: ICAO Annex 14 Vol. I Low Intensity Runway Approach , a division of Energy Technology srl Via della Solidarietà 2/1 40056 Valsamoggia (Bologna) - Italy Ph: +39 051 66 56 611 – www.ocem.com

Basic P/N: Compliance: I = ICAO R = FAP-170 (Russia) Use Code: See Tab. A Colour: See Tab. A Lamp: ■ 045 = 1x45W 6.6A GZ 9.5 120 = 1x120W 6.6A GZ 9.5 Configuration: - P-001 = Fixture complete with breakable coupling C-250 = Semi-assembled fixture with a cable lead of L= 2.5 m(1) P-090 = Fixture complete with mounting pole, 90 cm long, and breakable coupling (only use code T and colour RR) P-175 = Fixture complete with mounting pole, 175 cm long, and breakable coupling (only use code T and colour GG) (1) Mounting pole and breakable coupling must be ordered separately (see accessories) Y Colour:...

MAI N COMPONENTS OF THE LIGHT UNIT 1 Lens with metallic ring and hardware 2 Lamp 3 Lampholder 4 Clamp for lens 5 O-Ring for lens 6 Body 7 Coupling with hardware 8 Breakable couping 9 FAA L-823 plug Refer to the relevant technical manual for the complete list of the available spare parts ACCESSORIES 013.0010 Set of two ryton rings for receptacle support inside pipe elbow 013.0008 Galvanized steel pipe elbow with upper threaded end only (2" - 11 GAS thread) 315.3210 Galvanized steel pipe elbow with both threaded ends (2" - 11 GAS thread) 315.1228 Base L-867, Class IA, Size B, 24" Deep 315.1062...