OBSTA STIF 12VCC & 24VCC
2Pages

OBSTA STIF 12 VDC & HISTIF 24 VDC The OBSTA STIF 12 VDC and HISTIF 24 VDC beacon is devoted to the obstacle marking with a DC power supply. Its power consumption is lower than traditional cold discharge neon lights, thanks to a patented optic from OBSTA. It is recommended in severe environments (temperatures, etc.) One-piece molded • perfectly waterproof • no grounding issue • all wiring configuration available • no rise from the ground potential (due to lightning for example) • increased reliability Focalized neon light • continous Voltage • power by a backup power source for continuity of the marking (batteries) or by a solar power source (photovoltaic panels) • protected against transient voltages • integrated self diagnostic of the light (control of a remote signalization or a backup light possible) MAIN CHARACTERISTICS OBSTA part number Power supply Luminous intensity Current consumption Nominal power Lifetime (without any light decrease*) * with power supply stabilized OBSTA080905B - document could be modified without notice • discharge light with 3 focalized stages • patented technology • cover and optical system in hard glass • « aviation » red color • very long life expectancy in all climatic environement • great light efficiency • power consumption twice lower than for the tra

LOW INTENSITY NEON ADDITIONAL FEATURES LIGHT INTENSITY DIAGRAM STIF IP degree Operating temperature Power supply 2 screws type M8 (provided) Thikness to screw into : 1 up to 5 mm On stripped wires (2 power wires, 2 alarm wires) SPECIAL PRECAUTIONS For chimney installation, install the light under the top (1.5 to 3m, 5 to 10ft), as per ICAO and FAA recommendations. For installation in intense electromagnetic fields, the use of shielded wire is highly recommended. OTHER FUNCTIONS Protection contre les surtensions 2 fixations M8 - Failure remote signalization by relay (see diagram) Détail de...