LIT Low-Intensity Tower Light Series
2Pages

LIT Low-Intensity Tower Light Series! OBELUX ICAO Low-intensity Type A 10 cd *”ICAO Low-intensity Type B and Type E 32 cd ■ Low-intensity 50 cd FINLAND | The information in this document is subject to change without notice. © Obelux Oy 2019 Optical characteristics ► 10 cd Type A ► 32 cd Type B fixed ► 32 cd Type E flashing ► 50 cd for the Netherlands ► Colour aviation RED ► NVG compliant infrared (850nm) ► According to ICAO Standards and Recommended Practices Specifications met ICAO International Standards and Recommended Practices: Aerodromes Annex 14 Volume 1, 8th Edition, July 2018, Chapter 6: Low-intensity Type A/B/E. Chapter 6.2.4 Wind turbines FAA Advisory Circular AC 150/5345-43J: Specification for Obstruction Lighting Equipment, 3/11/2019 FAA L-810, L-810(F) Einordnung als Hindernisfeuer Erweiterte Spezifikation gemaG Allgemeine Verwaltungsvorschrift zur Kennzeichnung von Luftfahrthndernissen vom 26.08.2015 (GERMANY) Finnish Civil Aviation Authority, Traficom (FINLAND) Transportstyrelsen TSFS 2010:155 (TSFS 2013:9, TSFS 2016:95, TSFS 2019:27) (SWEDEN) Luftfartstilsynet FOR-2014-07-15-980 (NORWAY) Ministerie van Infrastructuur en Milieu (lage intensiteit), 30.9.2016 (NETHERLANDS) LIT Low-Intensity Tower L ight series LED Aviation Obstruction Lights LIT series is Obelux’s unique design to mark intermediary levels on wind turbines. The light is installed from inside the tower through extremely small hole. All maintenance and replacement work can be done from inside the tower which allows savings in case of maintenance or repair is needed. Key Features ► Based on LED technology ► Suitable for Offshore environment ► “Through-the-wall” tower marking solution; i.e. pin light ► Supports both stand-alone and RS-485 Modbus operations ► Built-in photocell ► Built-in fault monitoring ► Can also be controlled with voltage signals ► Design lifetime more than 20 years ► 5-year warranty ► Option for 10-year warranty, the longest in the industry The information contained in this document is subject to change without notice. © Obelux Oy 2019

Electrical Characteristics ► AC models: Nominal 115 or 230 VAC, 50Hz / 60Hz ± 6% ► DC models: DC voltage range: 10 - 60 VDC ► Rated current: < 1A ► Built-in overvoltage protection. ► Power consumption starting from 2W upwards ► Alarm relay in all versions. Dry Contact 250VAC (8A) or 60VDC (0.75A) ► RS-485 ModBUS (isolated) communication versions available ► Lights can be daisy-chained (both power and data) ► Overvoltage Protection level: class III -IEC61643-11 ► Control voltage signal option: 3-55VDC for IR and/or RED Mechanical Characteristics ► Pin size • 018mm x 50mm (diameter x length):...