Catalogs >
NYCO >
HYDRAUNYCOIL FH 2

HYDRAUNYCOIL FH 2
1Pages

Catalog excerpts

AERONAUTICS & DEFENCE TECHNICAL DATA SHEET DESCRIPTION Hydraunycoil FH 2 is a synthetic hydraulic fluid based on a blend of poly-alpha-olefins and diesters, with a viscosity of 15 cSt at 40°C and a viscosity index of 125. It contains anti-corrosion and anti-wear additives. Its operating temperature range is - 40°C to + 160°C in continuous use. It is supplied with a controlled particulate contamination level. FH 2 is a substitute to MIL-PRF-5606/H-515 (petroleum based oils): reducing fire hazard due to high flash point, fire point and autoinflammation temperature, evaporation loss is highly reduced. APPLICATIONS • Helicopter systems • Hydraulic fluid • Landing gear fluid • Fire resistant • Leak testing • Shock strut fluid for landing gear absorber • Test bench • Hydraulic actuators • Missile hydraulic systems Characteristic Unit Typical Result Test method Report Red oil min. 1.00 min. 3.45 min. 14.0 max. 2200 no gelling, clouding, crystallization, solidification or - Auto-ignition temperature ° C 380 - Pour point °C - 66 - Total acid number mg KOH/g 0.03 - Evaporation loss, 6 h 30 at 205°C %w - Foaming test (tendency/stability) at 24°C - Steel on steel wear, 4-ball machine, scar diameter After 1 h at 9.8 N After 1 h at 98 N After 1 h 392 N - Water content NYCO - 66 avenue des Champs Elysees BP 414 - 75366 PARIS CEDEX 8 France | Tel. : +33 145 615 000 | Fax : +33 145 615 013 | E.mail : info@nvco.fr: aero@nyco.fr | www.

Open the catalog to page 1

HYDRAUNYCOIL FH 2 1Pages

Catalog excerpts

All NYCO catalogs and technical brochures

HYDRAUNYCOIL FH 2
1Pages