2014 HYDRAUNYCOIL FH 2
2014 HYDRAUNYCOIL FH 2
- Helicopter systems
- Hydraulic fluid for landing gear
- Fire-resistant applications
- Leak testing
- Shock strut fluid for landing gear absorbers
- Test benches
- Hydraulic actuators
- Missile hydraulic systems
- Density at 20°C: 0.854 (ASTM D 4052)
- Appearance: Limpid red oil
- Kinematic Viscosity: At 205°C: 1.10 mm²/s, At 100°C: 3.51 mm²/s, At 40°C: 14.25 mm²/s, At -40°C: 2078 mm²/s (ASTM D 445)
- Low Temperature Stability: Passes at -40°C (FED-STD-791-3458)
- Flash Point: 220°C (ASTM D 92)
- Fire Point: 250°C (ASTM D 92)
- Auto-ignition Temperature: 380°C (ASTM E 659)
- Pour Point: -66°C (ASTM D 97)
- Total Acid Number: 0.03 mg KOH/g (ASTM D 664)
- Evaporation Loss: 18.8% at 205°C (ASTM D 972)
- Foaming Test: 7/0 at 24°C (ASTM D 892)
- Steel on Steel Wear: Scar diameter after 1h at 9.8 N: 0.10 mm, 98 N: 0.24 mm, 392 N: 0.55 mm (ASTM D 4172)
- Solid Particles Content: 5-15 µm: 2750, 16-25 µm: 150, 26-50 µm: 40, 51-100 µm: 10, >100 µm: 1 (HIAC automatic counter)
- Elastomer NBR-L Compatibility: 20% volume change after 168h at 70°C (FTM-S-791-3603)
- Water Content: 56 mg/kg (ASTM D 1533)
Catalog excerpts
AERONAUTICS & DEFENCE TECHNICAL DATA SHEET DESCRIPTION Hydraunycoil FH 2 is a synthetic hydraulic fluid based on a blend of poly-alpha-olefins and diesters, with a viscosity of 15 cSt at 40°C and a viscosity index of 125. It contains anti-corrosion and anti-wear additives. Its operating temperature range is - 40°C to + 160°C in continuous use. It is supplied with a controlled particulate contamination level. FH 2 is a substitute to MIL-PRF-5606/H-515 (petroleum based oils): reducing fire hazard due to high flash point, fire point and autoinflammation temperature, evaporation loss is highly reduced. APPLICATIONS • Helicopter systems • Hydraulic fluid • Landing gear fluid • Fire resistant • Leak testing • Shock strut fluid for landing gear absorber • Test bench • Hydraulic actuators • Missile hydraulic systems Characteristic Unit Typical Result Test method Report Red oil min. 1.00 min. 3.45 min. 14.0 max. 2200 no gelling, clouding, crystallization, solidification or - Auto-ignition temperature ° C 380 - Pour point °C - 66 - Total acid number mg KOH/g 0.03 - Evaporation loss, 6 h 30 at 205°C %w - Foaming test (tendency/stability) at 24°C - Steel on steel wear, 4-ball machine, scar diameter After 1 h at 9.8 N After 1 h at 98 N After 1 h 392 N - Water content NYCO - 66 avenue des Champs Elysees BP 414 - 75366 PARIS CEDEX 8 France | Tel. : +33 145 615 000 | Fax : +33 145 615 013 | E.mail : [email protected]: [email protected] | www.
Open the catalog to page 1All NYCO catalogs and technical brochures
HYDRAUNYCOIL FH 22 Pages
HYDRAUNYCOIL FH 422 Pages
NYCOLUBE 2941 Page
NYCOLUBE 127 CLP1 Page
NYCOLUBE 5600 HT SERIES1 Page
NYCO 17501 Page
NYCOSOL 131 Page
HYDRAUNYCOIL FH 191 Page
HYDRAUNYCOIL FH 141 Page
HYDRAUNYCOIL FH 131 Page
HYDRAUNYCOIL EL 46302 Pages
TFH51-1E8a1 Page
TTN160-1E7a2 Pages
TTN600-1E17a2 Pages
TTN3516-2E4a1 Page
- Grease
- Aeronautical grease
- Lubricating grease
- Aeronautical oil
- Lubricating oil
- Engine oil
- Aircraft grease
- Aeronautical paste
- Paste
- Turbine engine oil
- Bearing grease
- Aeronautical hydraulic fluid
- Aircraft oil
- Aeronautical solid lubricant
- Solid lubricant
- Gear grease
- Multipurpose grease
- Aircraft hydraulic fluid
- Lubricating solid lubricant