OverviewThe document provides a detailed datasheet for the M-pad 43R, a portable flat panel detector designed for radiography. It highlights the product's technical specifications, key features, and associated software.
Specifications- Sensor: Amorphous silicon panel with direct deposition CsI:Tl scintillator.
- Pixel Matrix: 4200 x 3400 with a pixel pitch of 100 µm.
- Dimensions: 555 x 505 x 34 mm; Weight: 9.1 kg.
- Shielding: 2 mm of tungsten.
- External Dimensions: 504.6 mm (w) x 553 mm (l) x 33.2 mm (h).
- Housing: Aluminium & polymer.
Electronics- Amplifiers: Low noise ASICs with 4 gain levels.
- ADC: 16-bit.
- Image Transfer Time: Wireless: 3000 / 600 / 200 ms.
Communications- Status Display: OLED display.
- Wireless Data I/F: 802 11n Wi-Fi standard at 5 GHz.
Advanced Features- Dynamic Mode: 1fps @ 200 µm resolution.
- On-board Corrections: Offset, shading & defect pixels.
Imaging Performance- Typical SRb: 130 µm.
- Dynamic Range: > 77 db.
- Imaging Lag: < 8% 1st frame.
- Radiation Energy: X-ray (400 kV max), Gamma (Se-75, Ir-192).
Environmental Conditions- Temperature: 10 °C to 35 °C operating conditions.
- Humidity: 20% to 80% operating conditions.
- IP Grade: IPX4 rated (protection against splashing water).
Customer Pack- Battery: 2x Li-Po battery, 5.8 Ah (up to 5 h operation).
- Battery Charger: Two bay charger 100 - 240 V AC, 50/60 Hz.
- Rugged Transport Case: Peli iM2875 (Dimensions: 632 × 602 × 333 mm).
Regulatory Standards- EN 60601-1/A1, EN 60601-1-2, FCC part 15 subpart E, ETSI EN 301 893 V2.1.1, ETSI EN 301 489-1 V2.2.0, ETSI EN 301 489-17 V3.2.0, EN ISO 10993-5, EN ISO 10993.
Software- Det-X: Fast and intuitive image acquisition software for asynchronous and synchronous control of X-ray emission and digital radiography acquisition.
- InXpect: Software for analysis and inspection of digital radiographs, allowing export as reports in Word or PDF format.
- M-link: An access point with an integrated battery for connecting multiple wireless X-ray devices directly to the control system without power outlets or duplicating Wi-Fi networks.
Contact InformationFor more information, visit
www.novadep.com or contact via email at
[email protected] or phone at (+34) 983 347 328.