- Catalogs
- NEUHÄUSER PRÄZISIONSWERKZEUGE GMBH
- PANEL CUT / DECORING CUT
PANEL CUT / DECORING CUT
PANEL CUT / DECORING CUT
The PANEL CUT tools are specifically designed for machining composite lightweight panels, allowing for clean drilling through sandwich panels without delamination or flagging. They are ideal for profiling operations, achieving high feed rates up to 10,000 mm/min (400 IPM) while maintaining a clean surface finish. The special tooth design increases tool life and reduces machining times.
Specifications:
- Cutting Diameter: 6.35 mm to 12.7 mm
- Cutting Length: 15.875 mm to 31.75 mm
- Overall Length: 63.5 mm to 76.2 mm
- Material: Solid Carbide
The DECORING CUT is engineered for drilling and undercutting in composite panels, enhancing bonding and stability. It features end teeth for drilling and undercutting without tool changes, and it pulverizes material to prevent core spring back. Available in Solid Carbide or HSS Cobalt Powdered Metal, it is coated with a patented PVD multi-layer for enhanced performance.
Specifications:
- Cutting Diameter: 11.113 mm to 20.638 mm
- Cutting Length: 5.08 mm to 17.78 mm
- Overall Length: 68.5 mm to 81 mm
- Material: Solid Carbide or Powdered Metal
Recommendations:
- Use Solid Carbide for plunging operations for longer tool life.
- Use HSS Cobalt Powdered Metal for undercutting operations.
Neuhäuser Präzisionswerkzeuge GmbH, Germany
Phone: 0 65 51 / 95 23-0
Email: [email protected]
Website: www.neuhaeuser-controx.com
Controx Inc., USA
Phone: 1-800-558-8966
Email: [email protected]
Website: www.controx.com
Catalog excerpts
Tools for the Machining of Composite Panels
Open the catalog to page 1
PANEL CUT The PANEL CUT tools are specially designed for the machining of composite lightweight panels. With the PANEL CUT it is possible to drill perfectly clean holes through sandwich panels without any delamination on the glass or carbon fiber skins or flagging of the honeycomb in between. It is also the ideal tool for profiling operations where the PANEL CUT achieves outstanding results. The honeycomb structure between the skins gets removed cleanly without any flagging. The outstanding advantage of the PANEL CUT is the possibility of extremely high feed rates while still establishing a clean...
Open the catalog to page 2
The DECORING CUT with its sophisticated tooth geometry is suitable for plunging and undercutting of the skins in composite sandwich panels like no other tool. We recommend the Solid Carbide version if plunging is a main part of the work due to a longer tool life. For mainly undercutting operations, the HSS Cobalt Powdered Metal DECORING CUT is suitable. The DECORING CUT has a PVD multi-layer coating for maximum performance and tool life. The tools are available from stock in different dimensions. Please choose the cutting length depending on the panel width. Please take the details from the following...
Open the catalog to page 3
Controx Inc. 5776 Urbana Road • Springfield, OH 45502 • USA Phone 1-800-558-8966 • Fax 1-800-356-0293 [email protected] www.controx.com
Open the catalog to page 4
