YOU GET MORE WITH MURRAY Spring-Loaded T-Bolt Clamps - SAE Type “TBLS" • Murray spring-loaded clamps are designed to compensate for the expansion and contraction of hose caused by temperature and/or hose cold flow. Typical installations include silicone hoses on charge air cooling/air to air, after cooling systems, and primary engine coolant systems. • TBLS series clamps use a plated steel self-locking nut, bolt and spring. The balance of the components are made from 300 series stainless steel. Band edges are rounded to protect hoses. • More material configurations available. NOTE: Coil springs should not be compressed to solid at installation. Make sure the nut is positioned approximately one to two turns from solid. This allows the clamp to expand and contract. Clamp Series Diameter Inches Nominal Diameter Millimeters Murray Corporation 260 Schilling Circle Hunt Valley, MD, 21031, USA SIZES AVAILABLE UPON REQUEST Email Your Purchase Order to [email protected]