KVGT
KVGT
- Material: Available in 304 stainless steel (W4) and 316 stainless steel (W5). Other material grades (W1 and W2) are available upon request.
- Band Widths: 9mm and 12mm.
- Range of Adjustment: Varies by part number, ranging from 8mm to 160mm.
- Installation Torque: 9mm clamps require 25-40 in.lbs., while 12mm clamps require 60 in.lbs.
- Rated Ultimate Torque: Plated/400SS screw = 50 in.lbs.min (5.6Nm), 300SS screw = 60 in.lbs.min (6.8Nm).
- Recommended Installation Torque: 30-40 in.lbs. (3.4-4.5Nm).
- Meets DIN 3017 standard.
- Common applications include vehicular, industrial, mechanical engineering, plumbing, and marine.
- Band edges are rolled to protect soft hoses from shearing and fraying.
Catalog excerpts
YOU GET MORE WITH MURRAY Embossed Non-Perforated Worm Gear Clamps SIZES AVAILABLE • Meets the DIN 3017 standard • Available in all 304 stainless steel (W4) and 316 stainless steel (W5). Ask your sales representative for W1 and W2 material grades. UPON REQUEST • Available in 9mm and 12mm band widths. • General purpose non perforated band especially suited for most hoses and soft silicone hoses • Band edges rolled to protect soft hoses from shearing and fraying • Common applications include: vehicular, industrial, mechanical engineering, plumbing and marine 9mm Wide Embossed Band Clamps W4 Mat'l Email Your Purchase Order to [email protected] 12mm Wide Embossed Band Clamps Installation Torque Part Number Part Number W4 Mat'l Part Number Installation Torque Part Number Murray Corporation 260 Schilling Circle Hunt Valley, MD, 21031, USA Rated Ultimate Torque: Plated/ 400SS screw = 50in.lbs.min (5.6Nm) - 300SS screw= 60in.lbs.min. (6.8Nm) Recommended Installation Torque: 30-40in.lbs. (3.4-4.5Nm)
Open the catalog to page 1All Murray Corporation catalogs and technical brochures
KS1 Page
EB91 Page
XH series1 Page
QR series1 Page
H series1 Page
SLHD series - SLF series1 Page
DB series1 Page
TSS series1 Page
BH1 Page
EXT Series1 Page
VB1 Page
TBB/TBA1 Page
TBLS1 Page
TB series1 Page
KSC series1 Page