Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. Murray Corporation
  3. EB9
video corpo

EB9

EB9
1 / 1 PageView full catalog

EB9

Product catalog summary
Product Overview:
Murray Corporation offers a range of embossed non-perforated worm gear clamps available in two band widths: 9mm and 12mm. These clamps are designed for general-purpose use, particularly suitable for most hoses and soft silicone hoses. The band edges are rolled to prevent shearing and fraying of soft hoses.

Material Specifications:
The clamps are available in two material grades: 304 stainless steel (W4) and 316 stainless steel (W5). Additional material grades (W1 and W2) can be requested through a sales representative.

Product Range and Specifications:
  • 9mm Wide Embossed Band Clamps: These clamps have a range of adjustment from 8mm to 160mm with installation torque ranging from 25.0 to 40.0 in lbs.
  • 12mm Wide Embossed Band Clamps: These clamps have a range of adjustment from 12mm to 160mm with an installation torque of 60.0 in lbs.

Standards and Applications:
The clamps meet the DIN 3017 standard and are commonly used in vehicular, industrial, mechanical engineering, plumbing, and marine applications.

Torque Specifications:
The rated ultimate torque for plated/400SS screws is 50 in.lbs.min (5.6Nm), and for 300SS screws, it is 60 in.lbs.min (6.8Nm). The recommended installation torque is between 30-40 in.lbs. (3.4-4.5Nm).

Additional Information:
More sizes are available upon request. Orders can be placed by emailing the purchase order to [email protected].
See more

Catalog excerpts

EB9-1

YOU GET MORE WITH MURRAY Embossed Non-Perforated Worm Gear Clamps SIZES AVAILABLE • Meets the DIN 3017 standard • Available in all 304 stainless steel (W4) and 316 stainless steel (W5). Ask your sales representative for W1 and W2 material grades. UPON REQUEST • Available in 9mm and 12mm band widths. • General purpose non perforated band especially suited for most hoses and soft silicone hoses • Band edges rolled to protect soft hoses from shearing and fraying • Common applications include: vehicular, industrial, mechanical engineering, plumbing and marine 9mm Wide Embossed Band Clamps W4 Mat'l Email Your Purchase Order to [email protected] 12mm Wide Embossed Band Clamps Installation Torque Part Number Part Number W4 Mat'l Part Number Installation Torque Part Number Murray Corporation 260 Schilling Circle Hunt Valley, MD, 21031, USA Rated Ultimate Torque: Plated/ 400SS screw = 50in.lbs.min (5.6Nm) - 300SS screw= 60in.lbs.min. (6.8Nm) Recommended Installation Torque: 30-40in.lbs. (3.4-4.5Nm)

 Open the catalog to page 1

All Murray Corporation catalogs and technical brochures

  1. KS
    KS

    1  Page

  2. KVGT
    KVGT

    1  Page

  3. XH series
    XH series

    1  Page

  4. QR series
    QR series

    1  Page

  5. H series
    H series

    1  Page

  6. SLHD series - SLF series
    SLHD series - SLF series

    1  Page

  7. DB series
    DB series

    1  Page

  8. TSS series
    TSS series

    1  Page

  9. BH
    BH

    1  Page

  10. EXT Series
    EXT Series

    1  Page

  11. VB
    VB

    1  Page

  12. TBB/TBA
    TBB/TBA

    1  Page

  13. TBLS
    TBLS

    1  Page

  14. TB series
    TB series

    1  Page

  15. KSC series
    KSC series

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.