Fluorosint® PTFE
8Pages

Quadrant developed the Fluorosint range of enhanced PTFE materials to fill the performance gaps where unfilled and low-tech, filled PTFE based polymers underperform. Each Fluorosint material was specifically developed to excel in demanding bearing and seal applications. While each of these materials possess the chemical resistance and compliance of PTFE, each material offers some special benefits that give the designer clear performance advantages. Fluorosint® 500 • Outstanding dimensional stability - approximating aluminum • Low deformation under load Fluorosint® HPV • FDA compliant •...

Key Benefits Fluorosint 500 Enhanced PTFE offers an ideal combination of stability and wear-resistance for sealing applications where tight dimensional control is required. Fluorosint 500 also greatly reduces the risk of a catastrophic system failure by becoming a sacrificial wear surface. With a deformation under load 9 times lower than virgin PTFE, Fluorosint 500 allows designers to greatly improve the efficiency of systems without sacrificing the wear resistance and forgiving benefits of PTFE. The synthetic mica developed and manufactured by Quadrant delivers tolerance performance...

Key Benefits FDA compliant Fluorosint 207 Enhanced PTFE is a significant White / Light Grey performance upgrade for any designer using PTFE for applications where temperature resistance, chemical resistance and FDA compliance are all important. Fluorosint 207 lasts far longer than unfilled PTFE in wear applications and has an extremely low coefficient of friction. Fluorosint 207 works well against most mating surfaces. Common Applications • Seals • Mixers • Pumps • Appliances • Bearings • Valve seats APPLICATION EXAMPLE Fluorosint 207 replaces unfilled PTFE and low-tech, filled PTFE's in...

Fluorosint HPV Product Overview Key Benefits FDA compliant Fluorosint FIPV is a high performance bearing grade of Fluorosint - optimized for high PV and very low "K", or wear factor. Fluorosint HPV was developed for bearing applications where other, low-tech PTFE formulations exhibit premature wear or simply cannot perform. FDA compliance gives food and pharmaceutical equipment manufacturers new design options and all benefit from its excellent load bearing and wear characteristics. Common Applications • Bearings • Commercial food equipment • Wear guides • High performance seals • Thrust...

Product Overview FLUOROSINT® MT-01Ultra-High Performance Grade For Stability At Elevated Temperature Key Benefits Fluorosint MT-01 is an extreme service grade developed specifically for applications where the benefits of PTFE-based materials also require strength, stiffness and stability. Fluorosint MT-01 delivers high mechanical performance at elevated temperature and as a result is often specified in seat, seal and wear applications where extreme conditions are present. Common Applications • High temperature seals • Linear guides • Wear bands • Ovens and dryers APPLICATION...

Learn more online at www.quadrantplastics.com Quadrant has extensive product and machining resources available online. Our website is a portal to a wealth of technical data and the easiest way to engage our application specialists. Our leant stands ready' to help offer solutions to your toughest problems. NORTH AMERICA 60 Ha Mei San Tsuen, Ping Shan YUEN LONG, N.T. Hong Kong Tel +852(0)24702683 Fax +852 (0) 24789966 e-mail: asia.epp@qplas.com BELGIUM • FRANCE • GERMANY • HONG KONG • HUNGARY • INDIA • ITALY • JAPAN • KOREA • MEXICO • POLAND SOUTH AFRICA • SWITZERLAND • THE NETHERLANDS •...